Adjustable Depth Armored Thermocouples

ADR and ADF

^€59,63 ADR-E-G-1-24-1

PASSEZ VOTRE COMMANDE

Locking Fitting Freely Adjustable Over Flexible Armor
Spring-Action Catch Holds Probe Firmly in Place
TYPE ADF Fixed Locking Cap Becomes a Permanent Part of Your Installation
TYPE ADR Removable Locking Cap Bayonet Fitting Connects with a Twist

Thermocouples - Voir Les Produits Associés

Déscription

This unique thermocouple is easy to adjust to ANY immersion depth into thermowells (but NOTE: this probe cannot be immersed in liquids). Adjustable depth eliminates the need to stock a variety of fixed depth immersion probes. The locking cap can be positioned anywhere along the flexible armor and obtains its locking force from a unique spring- action catch. The welded stainless steel tipped probe is held against the bottom of the well by compression of the armor.

Two styles are available. Style ADF has a unique locking fitting that mounts permanently to your equipment. The quick release action of the locking fitting allows fast installation and removal of the probe.

Style ADR has a removable locking fitting and requires a BTA adapter. This style is ideal for installations where the mounting surface is under a layer of insulation, or where the locking cap must be removable.

Detailed Dimensions for ADR, ADF, and Termination Styles

Detailed Dimensions for ADR, ADF, and Termination Styles

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

ADR-E-G-1-24-1

€59.63

Stock: 4 semaines

Removable Locking Cap Probe, Type E, grounded junction, A dimension 1", B dimension 24", Spade Lugs Termination

ADR-J-G-1/2-30-2

Consultez le Service de ventes

Stock:

Removable Locking Cap Probe, Type J, grounded junction, A dimension 1/2", B dimension 30", Male Quick Disconnect Termination

ADR-K-U-2-48-1

€61.29

Stock: 4 semaines

Removable Locking Cap Probe, Type K, ungrounded junction, A dimension 2", B dimension 48", Spade Lugs Termination

ADF-T-U-2-48-3

Consultez le Service de ventes

Stock:

Removable Locking Cap Probe, Type T, ungrounded junction, A dimension 2", B dimension 48", Female Quick Disconnect Termination

Accessories

ADR-LF

€18.89

Stock: 4 semaines

Locking Fitting

ADF-LF

€18.89

Stock: 4 semaines

Locking Fitting

Trier par Référence

Code d'article

Qté

Code d'article

Qté

† Tous les Montants indiqués Dans EUR
Notez: Click here for help in selecting the thermocouple junction.

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3) (4) (5) (6)

- - - - -

RAZ

Descriptions des options de:

(1) Style Select:
ADR pour style ADR
ADF pour style ADF

(2) Calibration Select:
J pour J type
K pour K type
T pour T type
E pour E type

(3) Junction(see notes section above help selecting the junction) Select:
G pour Grounded
U pour Ungrounded

(4) A dimension Select:
1/2 pour 1/2 in.
1 pour 1 in.
2 pour 2 in.
3 pour 3 in.

(5) B dimension Select:
24 pour 24 in.
30 pour 30 in.
36 pour 36 in.
48 pour 48 in.

(6) Termination Styles Select:
1 pour Spade Lugs
2 pour Male Quick Disconnect Type OST
3 pour Femail Quick Disconnect Type OST
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Produits Liés:

General Thermocouple Specifications
Achetez maintenant →
Color Codes for Thermocouples, Wire and Connectors, tolerances, special limits of error, reference guide