Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Industrial Immersion Heaters with Thermostat for Water, 2¼ BSP

ARMTIE

Industrial single or 3 phase Immersion Heaters with Thermostat for Water | ARMTIE

€282,58 ARMTIE210

PASSEZ VOTRE COMMANDE
  • Single or 3 phase Immersion heater with thermostat and Incoloy sheath
  • 2¼ BSP brass fitting
  • Incoloy pocket with 5 to 80°C or 30 to 90°C thermostat included
  • Optional 45 to 120°C thermostats available
  • IP55 aluminium terminal cover
  • Options for 240 or 3-phase 415 volt operation
  • Pressure rating: 150 Psig / 10 Barg.
Thermoplongeurs - Voir Les Produits Associés

Déscription

3 kW to 12 kW immersion heaters include a built-in incoloy pocket with a 20 amp, 5 to 80°C or 30 to 90°C thermostat. See the to-order table below for specific thermostat ranges and lengths supplied with each model. To order with an optional high temperature 45 to 120°C 20 amp thermostat add "-HT" to the part number and check price or order using the part number builder below.

The IP55 rated aluminium head is approximately 120 mm diameter and 100 mm high. The brass boss has a 2¼" BSP thread and gasket for fitting in a tank through a suitable boss. An optional brass back nut and gasket is also available for alternative mounting.

To get the best service and optimum stratification it is recommended to mount the heater horizontally at the bottom of the tank. Care should be taken to ensure the elements are immersed at all times and are not allowed to run in sludge, to avoid burning out.

Please contact our sales department for screw in immersion heaters with 1¼, 1½, 2 or 2½ BSP brass fittings and 2¼ BSP in stainless steel.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
240 Vac Single Phase Industrial Immersion Heaters
ARMTIE210
€282.58
Stock: 5 semaines
 
2 kW immersion heater with 254 mm (10") immersed length. With 7" 5-80°C stat. 240 Vac
ARMTIE311
€298.46
Stock: 5 semaines
 
3 kW immersion heater with 276 mm (11") immersed length. With 7" 5-80°C stat. 240 Vac
ARMTIE330
€333.29
Stock: 5 semaines
 
3 kW immersion heater with 762 mm (30") immersed length. With 18" 30-90°C stat. 240 Vac
ARMTIE411
€282.58
Stock: 5 semaines
 
4 kW immersion heater with 276 mm (11") immersed length. With 11" 5-80°C stat. 240 Vac
ARMTIE416
€305.18
Stock: 5 semaines
 
4 kW immersion heater with 406 mm (16") immersed length. With 11" 5-80°C stat. 240 Vac
ARMTIE616
€305.18
Stock: 5 semaines
 
6 kW immersion heater with 406 mm (16") immersed length. With 11" 5-80°C stat. 240 Vac
ARMTIE616-HT
€348.00
Stock: 5 semaines
 
6 kW immersion heater with 406 mm (16") immersed length. With 11" 45-120°C stat. 240 Vac
ARMTIE724
€408.23
Stock: En stock
 
7.5 kW immersion heater with 610 mm (24") immersed length. With 18" 30-90°C stat. 240 Vac
ARMTIE914
€289.22
Stock: 5 semaines
 
9 kW immersion heater with 356mm (14") immersed length. With 11" 5-80°C stat. 240 Vac
ARMTIE927-HT
€428.28
Stock: 5 semaines
 
9 kW immersion heater with 686mm (27") immersed length. With 18" 45-120°C stat. 240 Vac
ARMTIE1224
€341.29
Stock: 5 semaines
 
12 kW immersion heater with 610 mm (24") immersed length. With 18" 30-90°C stat. 240 Vac
ARMTIE1224-415
€421.61
Stock: 5 semaines
 
Immersion heater 12kw, 24", 415v 3-phase
415 Vac 3 Phase Industrial Immersion Heaters
ARMTIE936-415
€373.82
Stock: 5 semaines
 
9 kW 3 Phase immersion heater with 914mm (36") immersed length. With 18" 30-90°C stat. 415 Vac
ARMTIE1836
€418.19
Stock: En stock
 
18 kW 3 Phase immersion heater with 914mm (36") immersed length. With 18" 30-90°C stat. 415 Vac delta
ARMTIE1836-HT
€481.83
Stock: 5 semaines
 
18 kW 3 Phase immersion heater with 914mm (36") immersed length. With 18" 45-120°C stat. 415 Vac delta
Accessories
ARMTIE-NUT
€35.09
Stock: 5 semaines
 
2¼ brass back nut and gasket
† Tous les Montants indiqués Dans EUR
Notez: Cleaning and Maintenance: Whilst the heater does not attract deposits, in hard water areas scale may accumulate. It is essential that the heater section is cleaned frequently in these cases to avoid overheating and premature failure of the elements. This should be carried carefully to avoid damaging the sheath material.

 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:


(1) Heater Immersion Length and Wattage Select:
ARMTIE210 pour 2kw 254mm (240 V only)
ARMTIE311 pour 3kw 276mm
ARMTIE330 pour 3kw 762mm
ARMTIE411 pour 4kw 276mm
ARMTIE416 pour 4kw 406mm
ARMTIE616 pour 6kw 406mm
ARMTIE630 pour 6kw 762mm
ARMTIE724 pour 7.5kw 610mm
ARMTIE914 pour 9kw 356mm
ARMTIE927 pour 9kw 686mm
ARMTIE936 pour 9kw 914mm
ARMTIE1224 pour 12kw 610mm
ARMTIE1236 pour 12kw 914mm

(2) Voltage Select:
Rien (champ vide de congé) pour 240 Vac single phase
-415 pour 415 Vac 3 phase

(3) Thermostat Select:
Rien (champ vide de congé) pour standard thermostat
-HT pour 45 to 120 deg C thermostat
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >