Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT0805 541 038
INTERNATIONAL+33 01 57 32 48 17

Votre source pour la mesure et le Contrôle de Procédés

Pneumatic Angular Grippers

DCT Series 2 -Jaw Angular 180° Gripper

Pneumatic Angular Grippers | DCT Series 2 -Jaw Angular 180°  Gripper

Pneumatic Angular Grippers

470,00 DCT-12M

RoHS
  • Highly Configurable Modular Automation— Exclusive Direct Connect™ Robohand Technology Provides Multiple Mounting Options
  • Full Jaw Opening (180°) Allows Part to be Direct Fed into Gripper, Eliminating One Additional Motion
  • Compact Design for Use in Confined Spaces
  • Shielding to Repel Chips for Use in Harsh Environments
  • Precission Gripper - Repeatability ±0.05 mm (0.002") and Accuracy of ±0.07 mm (0.0028")
  • Up to 5 Million Cycles in Typical Applications and 10 Million with Maintenance
  • Temperature Rating from -35 to 80°C (-30 to 180°F)
  • System Requires 3 to 7 bar (40 to 100 psi) Dry Filtered (40 microns or better) Air Supply
  • Accessory Equipment Required— 4-Way 2-Position Pneumatic Control Valve
Mouvement - Voir Les Produits Associés

Déscription

Click on this link if you need more information about a pneumatic gripper.

DCT Series Pneumatic Grippers are angular grippers with a 180° jaw opening allowing complete release of a directly fed part. Gripper forces ranges from 32 N (7.5 lbs) to 112 N (25 lbs). These pneumatic grippers are compact and designed for confined spaces, but consideration must be given to allow for the additional space required for the rotating jaws. The adjustable stop accessory (BR) will help to reduce the space requirement by restricting the open position. Standard mounting is from the top, but the gripper can also be mounted from the back of the body and will operate in any direction. Each jaw has a useful rotational stroke of 90° for a full 180° opening and there is a over-stroke of approximately 1.5° before reaching the fully gripped position. Jaws have to be designed to close for a grip of 0° gripping position (parallel jaws).

Harsh Environments are no problem for this gripper due to the shielding that repels chips and other particulate from the internal drive mechanism.

Note: To limit shocks at the end of the opening or closing stroke, it is highly recommended to design jaws with minimal inertia (as light and short as possible). Flow control valves make it possible to reduce the rotation speed and are highly recommended.



Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.


To learn more about pneumatic valves, view the Technical Reference Article Technical Principles of Valves

To learn more about pneumatic grippers, view the Technical Reference Article "Introduction to Grippers"

Omega has "Additional Gripper Models " in stock for immediate delivery.




PNEUMATIC SPECIFICATIONS IMPERIAL METRIC
Pressure Operating Range: 3 to 7 bar(40 to 100 psi)
Cylinder Type: Double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
AIR QUALITY REQUIREMENTS
Air Filtration: 40 Micron or better
Air Lubrication: Not necessary*
Air Humidity: Low moisture content (dry)
TEMPERATURE OPERATING RANGE
Buna-N Seals (Standard): -35 to 80°C(-30 to 180°F)
FKM Seals (Optional): -30 to 150°C(-20 to 300°F)
MAINTENANCE SPECIFICATIONS
Expected Life Normal Application: 5 million cycles w/preventative maintenance 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
* Addition of lubrication will greatly increase service life.

SPECIFICATIONS DCT-12M
Total Rated Grip Force, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 32 N (7.2 lb)
Stroke: 90° of stroke for each finger
Weight: 0.09 Kg (0.20 lb)
Pressure Range: 3 to 7 bar (40 to 100 psi)
Cylinder Bore Ø: 12 mm (0.472")
Displacement: 1.92 cm3 (0.117 in3)
TEMPERATURE RANGE
    Standard Seals: -35 to 80°C (-30 to 180°F)
    FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation: 0.06 sec
Accuracy: ±0.07 mm (±0.0028")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate: 4-way, 2-position

SPECIFICATIONS DCT-16M
Total Rated Grip Force, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 70 N (16 lb)
Stroke: 90° of stroke for each finger
Weight: 0.16 Kg (0.35 lb)
Pressure Range: 3 to 7 bar (40 to 100 psi)
Cylinder Bore Ø: 16 mm (0.630")
Displacement: 4.12 cm3 (0.251 in3)
TEMPERATURE RANGE
    Standard Seals: -35 to 80°C (-30 to 180°F)
    FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation: 0.13 sec
Accuracy: ±0.07 mm (±0.0028")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate: 4-way, 2-position

SPECIFICATIONS DCT-20M
TOTAL RATED GRIP FORCE, F @ 7 bar (100 psi) L = 25 mm (1") @ 0°: 112 N (25 lb)
Stroke: 90° of stroke for each finger
Weight: 0.28 Kg (0.62 lb)
Pressure Range: 3 to 7 bar (40 to 100 psi)
Cylinder Bore Ø: 20 mm (0.787")
Displacement: 7.92 cm3 (0.483 in3)
TEMPERATURE RANGE
    Standard Seals: -35 to 80°C (-30 to 180°F)
    FKM Seals: -30 to 150°C (-20 to 300°F)
Actuation: 0.16 sec
Accuracy: ±0.08 mm (±0.003")
Repeatability: ±0.05 mm (±0.002")
Valve Required to Actuate: 4-way, 2-position
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
RoHS
Déscription
  
DCT-12M Star
470,00
Stock: 13 semaines
Conformes RoHS
180° Series Angular Pneumatic Gripper with 18 mm (0.71") jaw opening
  
DCT-16M Star
515,00
Stock: 13 semaines
Conformes RoHS
180° Series Angular Pneumatic Gripper with 20 mm (0.79") jaw opening
  
DCT-20M Star
590,00
Stock: 13 semaines
Conformes RoHS
180° Series Angular Pneumatic Gripper with 22 mm (0.87") jaw opening
Accessories
  
OISP-014 Star
131,00
Stock: 1 semaine
Conformes RoHS
4mm PNP inductive sensor with quick disconnect, 1 or 2 required
  
OISN-014 Star
131,00
Stock: 1 semaine
Conformes RoHS
4mm NPN inductive sensor with quick disconnect, 1 or 2 required
Cliquez pour agrandir / réduire une liste d'achat connexeOHSP-017
OHSP-017 Star
81,00
Stock: 13 semaines
Conformes RoHS
PNP magneto resistive sensor long barrel with quick disconnect, 1 or 2 required
Cliquez pour agrandir / réduire une liste d'achat connexeOHSN-017
OHSN-017 Star
81,00
Stock: 1 semaine
Conformes RoHS
NPN magneto resistive sensor long barrel with quick disconnect, 1 or 2 required
  
OHSP-011 Star
81,00
Stock: 1 semaine
Conformes RoHS
PNP magneto resistive sensor short 90° barrel with quick disconnect, 1 or 2 required
  
OHSN-011 Star
81,00
Stock: 13 semaines
Conformes RoHS
NPN magneto resistive sensor short 90° barrel with quick disconnect, 1 or 2 required
Cliquez pour agrandir / réduire une liste d'achat connexeCABL-010
CABL-010 Star
27,00
Stock: 1 semaine
Conformes RoHS
Quick disconnect cable 2 m (6') in length, 1 per sensor required
  
CABL-013 Star
31,00
Stock: 1 semaine
Conformes RoHS
Quick disconnect cable 5 m (16') in length, 1 per sensor required
  
BR-CT-12 Star
Consultez le Service de ventes  
Stock: 
 
Conformes RoHS
Adjustment stop kit (1 stop and 1 shielded plate) for DCT-12M, 1 required
  
BR-CT-16 Star
36,00
Stock: 13 semaines
Conformes RoHS
Adjustment stop kit (1 stop and 1 shielded plate) for DCT-16M, 1 required
  
BR-CT-20 Star
40,50
Stock: 13 semaines
Conformes RoHS
Adjustment stop kit (1 stop and 1 shielded plate) for DCT-20M, 1 required
  
SD-CT-16 Star
49,00
Stock: 1 semaine
Conformes RoHS
Inductive sensor mounting kit for DCT-16M, 1 or 2 required
  
SD-CT-20 Star
49,00
Stock: 13 semaines
Conformes RoHS
Inductive sensor mounting kit for DCT-20M, 1 or 2 required
Tous les Montants indiqués Dans EUR, GBP, USD.
Noter: Sensor and cable sold separately. Inductive sensor not available on DCT-12M.