Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Direct Mounting Signal Conditioners for FTB-930/940 Series Turbine Flowmeters  - Discontinued

FLSC-60 Series

Direct Mounting Signal Conditioners for FTB-930/940 Series Turbine Flowmeters | FLSC-60 Series

  • All units are suitable for direct mounting onto FTB-930/940 Series turbines

Déscription

The FLSC series has been discontinued. Please contact our Flow Engineering department for a viable replacement.

All units are suitable for direct mounting onto FTB-930/940 Series turbines

MODEL FLSC-61
The FLSC-61 is a 3-wire analog transmitter designed to linearly convert a frequency input to an equivalent voltage output whose level is switch selectable @ 0-5 V/0-10 V. full scale frequency range of 75 Hz-10 kHz is jumper selectable. The span adjustment establishes the frequency point at which the full scale voltage output (5 V or 10 V) is achieved. A sensitivity adjustment permits the FLSC-61 to discriminate between a signal input or noise.

MODEL FLSC-62
The FLSC-62 is a 2-wire loop powered analog transmitter designed to linearly convert a frequency input to an equivalent 4-20 mA current output. A full scale frequency range of 100 Hz -10 kHz is switch selectable. The span adjustment establishes the frequency point at which a 20 mA output is achieved. A sensitivity adjustment permits the FLSC-62 to discriminate between signal input or noise.

MODEL FLSC-64
The FLSC-64 amplifies and conditions low-amplitude signals such as those developed by a magnetic pickup coil. The amplitude of the squarewave output equals the input supply voltage of the FLSC-64. A sensitivity adjustment permits the FLSC-64 to discriminate between an input signal and noise.The FLSC-64 contains a built-in test oscillator that enables the operator to verify the amplifier’s operation without a signal source. The power LED illuminates when the input supply voltage is present.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
Signal Conditioners
FLSC-61
Consultez le Service de ventes  
Stock: 
 
 
0-5/0-10 Volt output
FLSC-62A
Consultez le Service de ventes  
Stock: 
 
 
4-20 mA output
FLSC-64
Consultez le Service de ventes  
Stock: 
 
 
Frequency amplifier
Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator's manual.


We noticed you are from the US. Visit your local site for regional offers and live support.