Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT0805 541 038
INTERNATIONAL+33 01 57 32 48 17

Votre unique source pour la mesure et le Contrôle de Procédés

Peristaltic Pump and Pump Motor

FPU500 FPU5MT

Peristaltic Pump and Pump Motor | FPU500 FPU5MT

Peristaltic Pump and Pump Motor

110,00 FPU500

  • FPU500 PERISTALTIC PUMP
  • Stainless Steel Rotor Assembly
  • Ideal for Use in Sterile, Corrosive, or General Operating Environments
  • Flowrates from 1.0 to 2280 mL/Min (36 GPH)
  • Mounts Directly onto OMEGAFLEX ® Motor or Compatible Pump Motor
  • Easily Stackable Mounting for Multichannel Pumping
  • Three-Roller Geometry Reduces Pulsation and Improves Priming
  • Polysulfone Housing for Durability and Chemical Resistance
  • FPU5-MT PUMP MOTOR
  • Digital Display of Flowrate, RPM, Total Volume, Fluid Temperature (°F or °C), Flow Duration, or Tube ID
  • Flow Rate 1.0 to 2280 mL/Min (10 to 600 RPM) Reversible
  • Easy-to-Read Display
  • Type K SMP Female Thermocouple Input
  • Tachometer Feedback, ±0.5% Speed Control
  • Accepts Two Pumps, One on Each Side or Two Stacked Together
  • Membrane Keypad for Easy Calibration
  • Remote Control Options Aux. In: Remote Start/Stop Aux. Out: Remote Monitor
  • Built-In Electronic Braking and Reversing for Fast Stops and Directional Changes
  • Accepts Metric or English Tube Sizes
  • Displays Information in English, French, Spanish, German, or Italian
Pompes et mélangeurs - Voir Les Produits Associés

Déscription

The FPU500 Series peristaltic pumps from OMEGA offer exceptional simplicity, ease of use, and variable flow capability. A motor turns the pump’s rollers, which squeeze fluid through precision-bore tubing in a wavelike motion. The fluid does not come into contact with the pump; only the outside wall of the tubing does. This makes these pumps ideal for use in sterile, corrosive, or general fluid flow operating environments.

The pump is self-priming and non-siphoning. When one section of the tube fatigues, simply move the tube along to an unused section and continue pumping. No tools are required to load the tube. A precision-molded tubing cavity provides the proper occlusion for the recommended tubing. A tube clamp holds the tubing securely in place. Tubing is easily changed without removing the pump.

One pump can be used for many different applications, or you can mount two pumps onto the motor. The pumps work with a wide variety of OMEGAFLEX® plastic tubing. Vinyl, FKM, Tygon, silicone, Santoprene, and Norprene® tubing can be purchased in a broad range of sizes. The standard rotor assembly is made of stainless steel.

The FPU500 pump can be purchased with an optional adaptor plate that can be used to mount the pump to a motor other than the FPU5-MT pump motor. The pump comes standard with 2 short mounting screws, used to mount one pump at a time. If you need to stack two pumps, order long mounting screws.

SPECIFICATIONS
Maximum Back Pressure: 20 psi
Maximum RPM to Prime: 100 RPM
Tube Wall: 1.6 mm (116")
Fluid Temperature Range: -46 to 149°C (-50 to 300°F)
Dimensions, Pump: 102 H x 102 W x 57 mm D (4 x 4 x 2¼")
Optional Mounting Plate: 76 H x 64 W x 3.2 mm D (3 x 2½ x 18")
Weight, Pump: 408 g (14.4 oz)
Optional Mounting Plate: 91 g (32 oz)
Maximum Tubing Size: 8 mm (516")
Maximum Tube Durometer: 65 Shore A
The OMEGAFLEXR FPU5-MT pump motor offers microprocessor control and a digital display, and is designed to be fully compatible with OMEGA's FPU500 pump. No mounting plate is needed, just two mounting screws. A 110 HP (75 W) motor provides flow rates of up to 2280 mL/minute. The user enters values and controls all operations through a convenient membrane keypad. A dot matrix LCD provides for easy viewing. Calibrating the unit is easy with the user-friendly control software. Simply select a tubing size and the desired flow rate, and the pump motor locks in the required RPM. Select nominal calibration values stored in ROM (read only memory) or calibrate via gravimetric or flowmeter measurements. Fluid temperature may be displayed (using an optional thermocouple probe). The last flow settings are stored in memory when the drives are shut off.

SPECIFICATIONS
Motor: Reversible, 110 HP (75 W), 90 Vdc
Display: 16-character dot matrix LCD, 9 mm H (38") characters
Power: 90 to 130 Vac, 1.5 A; 190 to 260 Vac, 0.8 A
Line Cord: 1.8 m (6') with U.S. standard plug on 115 Vac units; European plug on 230 Vac units
Housing: Painted sheet metal with rubber feet; units are stackable
Dimensions: 152 H x 254 W x 254 mm D (6 x 10 x 10")
Weight: 8.2 kg (18 lb)
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Stock
Prix
Déscription
Qté
Cliquez pour agrandir / réduire une liste d'achat connexeFPU500
FPU500
Star
Stock: 3 semaines  
110,00   
Peristaltic Pump
 
  
FPU5-MT-110
Star
Stock: 1 semaine  
855,00   
110 Vac Pump Motor
 
Cliquez pour agrandir / réduire une liste d'achat connexeFPU5-MT-220
FPU5-MT-220
Star
Stock: En stock  
855,00   
220 Vac Pump Motor
 
Accessories
Cliquez pour agrandir / réduire une liste d'achat connexeFPU500-AP
FPU500-AP
Star
Stock: 1 semaine  
26,50   
Adapter plate
 
  
FPU500-LMS
Star
Stock: 3 semaines  
4,40   
Long mounting screws (2)
 
  
FPU500-SMS
Star
Stock: En stock  
4,40   
Short mounting screws (2)
 
  
FPU500-RA
Star
Stock: 1 semaine  
66,00   
Replacement rotor assembly
 
Tous les Montants indiqués Dans EUR, GBP, USD.
Noter: The FPU500 pump can be purchased with an optional adaptor plate that can be used to mount the pump to a motor other than the FPU5-MT pump motor. The pump comes standard with 2 short mounting screws, used to mount one pump at a time. If you need to stack two pumps, order long mounting screws.
Exemple de commande: (1) FPU500 Peristaltic pump, €110,00  plus (1) FPU5-MT-110 110 Vac Motor, €855,00  plus (1) FPU500 Peristaltic pump, €110,00  plus (1) FPU5-MT-110 110 Vac Motor, €855,00, €110,00 + 855,00 + 110,00 + 855,00 = €1 930,00

Manuels de Produit:

Télécharger FPU5-MT-110, FPU5-MT-220 - OMEGAFLEX Peristaltic Pump Motor
Télécharger FPU500 - OMEGAFLEX® Peristaltic Pump
Télécharger FPU5-MT-110, FPU5-MT-220 - Omegaflex Pump (German version) FPU5-MT-110/FPU5-MT-220 (Schlauchpumpe)