Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Signal Powered Fiber Optic Modem

LDM80 Series

Signal Powered Fiber Optic Modem | LDM80 Series

Signal Powered Fiber Optic Modem

Garantie 1 an CE
  • Data Rates to 19.2K Baud at 2.2 Miles (3.5KM)
  • 17dB Optical Link Power Budget
  • Powered by RS-232 Host Port Signals
  • Full Duplex Asynchronous Operation
  • Indicating LEDs
  • DCE/DTE Switch
  • Designed for FCC Class A Requirements
  • Complies with FCC Class A Requirements
  • Pinned or Socketed RS-232 Connectors
Convertisseurs et produits de communication - Voir Les Produits Associés

Déscription

The LDM80 is a small, inexpensive fiber optic transmitter/receiver completely powered by the host RS-232 port. The enclosure for the LDM80 is a conductive shell which greatly reduces RF radiation and susceptibility. The rugged metal enclosure is small enough to mount on the back panel of typical computer equipment saving valuable desk and floor space.

A pair of these units allows most RS-232C cable links to be replaced and extended with a duplex fiber optic cable. The normal 50-foot RS-232 limit may be extended to 2.2 miles (3.5 km). Fiber optic data communications provide complete EMI/RFI rejection, isolation, elimination of ground loops, and reduced error rates. Data security is enhanced by almost nonexistent electromagnetic emissions. The RS-232 connection is through male or female EIA 25-pin connectors. The fiber optic connection is either through SMA (905) or ST connectors.

The LDM80 is equivalent to a 3-wire, full duplex, RS-232 circuit. Handshake signals are locally connected (see Figure 1. on PDF) Indicating LEDs come on during a "SPACE" on transmit or receive data. A TD/RD reversing DIP switch is provided for connection to DTE (Data Terminal Equipment) or DCE (Data Communication Equipment) ports. The LDM80 optical transmitter may be used with a wide range of fiber sizes. Specifications are for 100/140µm. Other fiber sizes may be used with a resulting different cable loss budget.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
LDM80-P-025
Consultez le Service de ventes  
Stock: 
 
 
Signal powered fiber optic modem, 25 pin male RS-232 connector, ST fiber optic connector
LDM80-S-025
Consultez le Service de ventes  
Stock: 
 
 
Signal powered fiber optic modem, 25 pin female RS-232 connector, ST fiber optic connector
Tous les Montants indiqués Dans EUR
Notez: Includes operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.