Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Seamless Incoloy Sheath Strip Heater

NS & NSL Series

Seamless Incoloy Sheath Strip Heater | NS & NSL Series

Seamless Incoloy Sheath Strip Heater

188,45 NS-1205/240V

  • 3/4" (1.9 cm) Wide, High Temperature
  • Rugged, Reliable, Premium Quality
  • 500 to 3000 Watt
  • 2 Terminals at One End
  • Seamless Construction
Plaques chauffantes - Voir Les Produits Associés

Déscription

Click here if you want to know more about strip heaters.

Strip-heater advantages for highertemperature applications are offered by NS series. The heater design, materials and construction give long life for given power densities. The Incoloy sheath encloses nickelchromium resistance wire embedded in a densely compacted refractory material selected for dielectric insulation value and good heat conduction to the sheath. The small cross-section is often an advantage where space is a factor.

Clamp-on temperatures to 1200°F
Maximum work temperature depends on the watt density of the heater. Table 1 gives a few examples of work temperatures at different watt densities. Figure C-11 of the Heater Selection Nomographs page can be used to determine allowable watt densities for other specific temperatures.

Mounting
The flat top and bottom surfaces may be flush mounted or sandwiched between two heatconducting metal parts. Straight heaters can be mounted on surfaces curved to 6" (15 cm) inside radius or larger. The heater may be field bent to minimum 3 " (8 cm) inside radius. Standard strip heater clamps and clamping bands may be used for mounting.

In free or forced air, sheath temperature to 1500°F, maximum work temperature depends on the watt density of the heater. Table gives a few examples of work temperatures at different watt densities.

Max. Work Temperature °F
Application 30 W/in2 20 W/in2 10 W/in2
Clamp-on 300 750 950
Convection
Air Heating
950 1200 1350
  


Dimension-Inches (cm) NS Series. Incoloy Sheath NSL Series. 10" Wire Type Leads
A B Watts W/In2 Model
No.
Model
No.
Wt.
(lb) kg
121/2 (32) 87/8 (23) 500 32 NS-1205/** NSL-1205/** .63 (.28)
133/4 (35) 101/8 (26) 500 28 NS-1405/** NSL-1405/** .68 (.30)
157/16 (39) 1113/16 (30) 500 24 NS-1505/** NSL-1505/** .73 (.33)
1713/16 (45) 143/16 (36) 750 30 NS-1807/** NSL-1807/** .90 (.40)
181/2 (47) 147/8 (38) 1000 38 NS-1801/** NSL-1801/* .93 (.42)
193/8 (49) 153/4 (40) 1000 36 NS-1901/* NSL-1901/* 1.0 (.45)
217/16 (54) 1713/16 (45) 1100 35 NS-2001/** NSL-2001/* 1.1 (49)
233/4 (60) 201/8 (51) 1200 34 NS-2401/* NSL-2401/* 1.2 (.54)
251/4 (64) 215/8 (55) 1300 34 NS-2501/* NSL-2501/* 1.25 (.56)
2615/16 (68) 235/16 (59) 1400 34 NS-2601/** NSL-2601/* 1.30 (.59)
303/16 (77) 269/16 (67) 1500 32 NS-3015/* NSL-3015/* 1.52 (.68)
3315/16 (86) 305/16 (77) 1500 28 NS-3301/** NSL-3301/* 1.68 (.76)
363/8 (92) 323/4 (83) 1850 32 NS-3601/* NSL-3601/* 1.85 (.83)
39 (99) 353/8 (90) 2000 32 NS-3802/* NSL-3802/* 2.00 (.90)
403/4 (104) 371/8 (94) 2100 32 NS-4302/* NSL-4302/* 2.13 (.96)
513/8 (130) 473/4 (121) 2700 32 NS-4827/** NSL-4827/* 2.7 (.12)
54 (138) 503/8 (128) 3000 34 NS-5403/*** NSL-5403/*** 2.75 (.12)
/* Designate voltage, i.e.; insert 120V for 120 or 240V or 480V voltage required.
/** 120 or 240 Vac only.
/*** 240 or 480 Vac only.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
NSL-2001/240V
278,31
Stock: 7 semaines
 
NSL series heater, 240 Vac
NSL-2401/120V
316,41
Stock: 7 semaines
 
NSL series heater, 120Vac
NSL-3015/120V
319,87
Stock: 7 semaines
 
NSL series heater, 120Vac
NSL-2001/120V
278,31
Stock: 7 semaines
 
NSL series heater, 120Vac
NSL-1807/240V
251,62
Stock: 5 semaines
 
NSL series heater, 240Vac
Examples of common part numbers are shown below. Use the Part Number Builder below this table for your exact configuration.
NS-1901/120V
221.84
Stock: 7 semaines
 
NS series heater, 120Vac, Nonreturnable
NS-1505/120V
195.21
Stock: 7 semaines
 
NS series heater,120Vac
NS-1205/240V
188.45
Stock: 7 semaines
 
NS series heater,240Vac
NS-2601/120V
250.29
Stock: 7 semaines
 
NS series heater, 120Vac, Nonreturnable
Tous les Montants indiqués Dans EUR

 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:


(1) Style Select:
NS pour NS series-incoloy sheath
NSL pour NSL Series- 10 in. wire type leads

(2) Size Power and Watt Density from Table Above Select:
1205 pour 1205
1405 pour 1405
1505 pour 1505
1807 pour 1807
1801 pour 1801
1901 pour 1901
2001 pour 2001
2401 pour 2401
2501 pour 2501
2601 pour 2601
3015 pour 3015
3301 pour 3301
3601 pour 3601
3802 pour 3802
4302 pour 4302
4827 pour 4827
5403 pour 5403

(3) Voltage Select:
120V pour 120 Vac
240V pour 240 Vac
480V pour 480Vac
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.
We noticed you are from the US. Visit your local site for regional offers and live support.