Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Parallel Pneumatic Grippers - Low Profile

RPL Series Parallel Gripper

RPL SERIES Parallel Pneumatic Grippers - Low Profile | RPL Series Parallel Gripper

RPL SERIES Parallel Pneumatic Grippers - Low Profile

468,81 RPL-1M

  • Precision Gripping-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
  • Gripper Force 116 to 160 N Stroke 6.4 to 19.1 mm
  • Accuracy of 0.05 mm and Repeatability of 0.03 mm
  • Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
  • Non-Synchronous Motion Option Provides Independent Jaw Operation
  • Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
  • Operating Temperature -35 to 80°C
  • System Requires 0.3 to 7 bar Dry Filtered (40 Micron or Better) Air Supply
  • Requires 4 Way, 2 Position Valve and Regulator for Delicate Parts
Mouvement - Voir Les Produits Associés

Déscription

More information about how a pneumatic gripper works in this link.

RPL Series Gripper is a pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. This gripper supports longer finger length designs compared to other grippers of similar sizes. These grippers are available in stroke lengths from 6.4 to 19.1mm with a grip force from 116 to 160 N.

Linear motion pneumatic components are double acting cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.

Specifications
Pneumatic Specifications
    Pressure Operating Range: 0.3 to 7 bar
    Cylinder Type: Dual double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C
    FKMSeals (Optional): -30 to 120°C
Maintenance Specifications
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
  
RPL-1M
468,81
Stock: 13 semaines
 
Parallel Gripper with a stroke length of 6.4mm (.025") and a grip force of 116 N (26 lb)
  
RPL-2M
667,83
Stock: 13 semaines
 
Parallel Gripper with a stroke length of 12.7mm (0.50") and a grip force of 116 N (26 lb)
  
RPL-3M
917,44
Stock: 1 semaine
 
Parallel Gripper with a stroke length of 19.1mm (0.75") and a grip force of 160 N (36 lb)
Accessories
Cliquez pour agrandir / réduire une liste d'achat connexeOSMK-008
OSMK-008
€44.35
Stock: 10 semaines
 
Sensor mounting kit, 1 required
Cliquez pour agrandir / réduire une liste d'achat connexeOHSN-017
OHSN-017
€153.64
Stock: 1 semaine
 
NPN magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Cliquez pour agrandir / réduire une liste d'achat connexeOHSP-017
OHSP-017
€217.36
Stock: 1 semaine
 
PNP magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Cliquez pour agrandir / réduire une liste d'achat connexeCABL-010
CABL-010
€52.69
Stock: 1 semaine
 
2 m (6') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
CABL-013
€91.13
Stock: 13 semaines
 
5 m (16') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
OFSV-004
€113.35
Stock: 13 semaines
 
M5 fail safe valve, 1 required
Tous les Montants indiqués Dans EUR
Notez: All models come with standard synchronous jaws, if non-synchronous jaws are required consult sales.
All sensors and cables sold sepatately.
We noticed you are from the US. Visit your local site for regional offers and live support.