Quick Disconnect Handle/Thermocouple Probe Sets with High Impact ABS or Rugged Aluminum Handles

SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets

^€81,64 SDX-SET-GP-J-SMP

PASSEZ VOTRE COMMANDE

Handles Supplied with 0.3m (1') Retractable Cable – Expands to 1.5m (5')!
In Stock with Subminiature Connector on Cable for Use with Handheld Thermometers
Free Mating Connector Included
SDX-UST Plastic Handle Accepts Both Standard and Miniature Probes/Connectors

Thermocouples - Voir Les Produits Associés

Déscription

General Purpose Probe:
General purpose immersion probe, 300mm 12" long, grounded junction, 1/8" O.D., 304 SS sheath. Rated to 900°C (1650°F).

Penetration Probe:
Conical tip for insertion into soft and semi-frozen material. 300mm (12") long, grounded junction, 4.5 mm (3/16") O.D. 304 SS. Tip rated to 900°C (1650°F).

Air Probe:
Exposed thermocouple element protected by 3/16" O.D. 304 SS sheath. Drilled end exposes bead to airflow for fast measurements. Constant diameter for easy insertion or mounting into duct work. 300mm (12") long. Rated to 870°C (1600°F).

Fast Response Probe:
Special reduced diameter (1/16") tip designed for fast response. Rugged 3 mm (1/8") O.D., grounded junction, 304 SS sheath. Tip rated to 900°C (1650°F).

Flexible Tip Surface Probe:
Flexible tip conforms to most surfaces for fast, repeatable, accurate measurements. Made from RTV silicone rubber for good thermal contact. 6mm (1/4") O.D. 304 SS sheath. 5/16 OD, overall. Tip rated to 260°C (500°F). Note: subjecting sensor tip to temperatures above 315°C (600°F) will result in tip damage.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

SDX-SET-GP-E-SMP

€83.11

Stock: 4 semaines

Handle/Probe Set, SDX High Impact Plastic Handle, General Purpose Probe, E Calibration

SDX-SET-AP-J-SMP

€182.71

Stock: 4 semaines

Handle/Probe Set, SDX High Impact Plastic Handle, Air Probe, J Calibration

SDX-SET-NP-E-SMP

€106.16

Stock: 4 semaines

Handle/Probe Set, SDX High Impact Plastic Handle, Penetration Probe, E Calibration

HDX-SET-GP-K-SMP

€90.18

Stock: 4 semaines

Handle/Probe Set, HDX Rugged Aluminum Handle, General Purpose Probe, K Calibration

HDX-SET-NP-T-SMP

€114.97

Stock: 4 semaines

Handle/Probe Set, HDX Rugged Aluminum Handle, Penetration Probe, T Calibration

† Tous les Montants indiqués Dans EUR

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3)

-SET- - -SMP

RAZ

Descriptions des options de:

(1) Select:
SDX pour SDX High Impact Plastic
HDX pour HDX Rugged Aluminum

(2) Select:
GP pour General Purpose Probe
NP pour Penetration Probe
AP pour Air Probe
RT pour Fast Response Probe
FSP pour Flexible Tip Surface Probe

(3) Select:
J pour J Type Thermocouple
K pour K Type Thermocouple
E pour E Type Thermocouple
T pour T Type Thermocouple
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Produits Liés:

General Thermocouple Specifications
Achetez maintenant →
Color Codes for Thermocouples, Wire and Connectors, tolerances, special limits of error, reference guide