Miniature and Standard Protection Tubes

SS-() and INC-() Series

^€10,84 SS-116-6OPEN

PASSEZ VOTRE COMMANDE

Available in 316 Stainless Steel or Inconel 600
6 Inch Length Standard, Other Lengths are Available
Available With Open or Closed Ends

Thermocouples - Voir Les Produits Associés

Déscription

OMEGA™ Miniature and Standard Protection Tubes are available in 316 stainless steel and Inconel 600 nickel alloy. Tubes are available either open at both ends or with one end closed. Standard length available from stock is 6 inches; however, practically any length tube is available on short delivery.

OMEGA’s protection tubes are intended for use with OMEGA’s fine or heavy gage thermocouples and ceramic insulators, as well as OMEGA’s standard thermocouples made from OMEGACLAD™ thermocouple wire. These items are shown in Section A of this catalog. Bare wire thermocouples can be insulated using OMEGATITE™ ceramic insulators as well as the insulators used in replacement elements.

OMEGA’s protection tubes can be conveniently secured into pipes, vessels, and chambers by using OMEGALOK™ compression fittings.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

SS-116-6OPEN

€10,84

Stock: 4 semaines

Stainless steel tube, 1/16 inch O.D., 6 inch length, open ended

SS-116-6CLOSED

€15,77

Stock: 4 semaines

Stainless steel tube, 1/16 inch O.D., 6 inch length, closed ended

SS-14-6OPEN

€11,66

Stock: 1 semaine

Stainless steel tube, 1/4 inch O.D., 6 inch length,open ended

SS-14-6CLOSED

€15,21

Stock: 1 semaine

Stainless steel tube, 1/4 inch O.D., 6 inch length, closed ended

† Tous les Montants indiqués Dans EUR

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3)

- -6

RAZ

Descriptions des options de:

(1) Tube Material All tubes above are 6 inches long Select:
SS pour 316 Stainless Steel
INC pour Inconel 600

(2) Tube O.D. Select:
116 pour 1/16 inch
18 pour 1/8 inch
316 pour 3/16 inch
14 pour 1/4 inch
516 pour 5/16 inch
38 pour 3/8 inch
716 pour 7/16 inch
12 pour 1/2 inch

(3) End Configuration Select:
CLOSED pour Closed End
OPEN pour Open End
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Miniature and Standard Protection Tubes

SS-(*) and INC-(*) Series

SS-() and INC-() Series