Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT0805 541 038
INTERNATIONAL+33 01 57 32 48 17

Votre unique source pour la mesure et le Contrôle de Procédés

Two-Wire, Process-Loop Indicator in NEMA-4X Housing

TX83A and TX84

Two-Wire, Process-Loop Indicator in NEMA-4X Housing | TX83A and TX84

Two-Wire, Process-Loop Indicator in NEMA-4X Housing

300,00 TX83A

Garantie 1 an OmegaCare
  • FM Intrinsic Safety Certification
  • Powered by 1 to 5, 4 to 20 or 10 to 50 mA Signal
  • 2.5 V Max Voltage Drop
  • 0.35 in (8.9 mm) LCD
  • 2,000-Count Zero Suppression or Elevation
  • 100 to 2,000 Count Span Adjust
  • Selectable Dummy Right-Hand Zero
  • -40 to 85°C Operation
  • Compact, 2.9" Diameter Die-Cast Housing
  • Waterproof to 35 kPa (5 psi)
  • Shock Resistant to 55 g

    Options
  • 1/2 EMT Conduit Fitting
  • 1/2 NPT Pipe Fitting
  • Relay-Track Mounting Adapters
  • External Explosion-Proof Housing
  • Companion Current Transmitters
Émetteurs - Voir Les Produits Associés

Déscription

Model TX83A is a two-wire current-loop indicator that is powered directly by a 1-5 mA, 4-20 mA or 10-50 mA process loop signal, with a maximum voltage drop of 2.5 V. No separate power supply connections are required. This reduces overall hardware and field wiring costs and provides immunity from most electrical noise encountered in process control environments. The electronics are isolated from the case.

Readout of Process Variables
The TX83A provides extensive zero and span adjustment capability, so that it can read out directly in percent or in engineering units for process variables such as pressure, flow, temperature, or level. Its liquid crystal display provides 3 1/2 active digits, a selectable dummy right-hand zero, and four programmable decimal points. By changing two internal jumpers, the normal positive slope response of the TX83A can be reversed, so that increasing the input decreases the reading.

Easy to Configure and Calibrate
Both span and zero are fine-tuned with precision multi-turn potentiometers. These are accessible through holes in the die-cast cover, which are normally sealed with fluorosilicone plugs. Coarse zero and span steps are selected by removing the cover with attached electronics and changing plug-in jumpers.

Designed for Harsh Environments
All versions of the TX83A are rated for operation from -40 to 85°C (-40 to 185°F) with specified accuracy. The case is made of die-cast metal and is waterproof to 35 kPa (5 psi). The electronics are firmly connected to the case top, so that the meter can withstand high vibration and shock. Mounting options include a male 1/2 EMT conduit fitting and a male 1/2 NPT pipe fitting in lieu of the normal rail or surface mount. These fittings eliminate the external screw terminals and provide a NEMA-4X rating.

Intrinsic Safety Certification
FM intrinsic safety certification is standard. Intrinsic safety certification allows the unit to be used in worst-case hazardous environments with no need for explosion-proof housing, provided that an intrinsic safety barrier is used to limit the voltage and current that may be introduced in the hazardous environment. FM certification (USA) is for Class I, II, III, Division 1, Groups A,B,C,D,E,F,G. The FM certification number is 5X2AO.AX.

Explosion-proof Housing Options
Two external NEMA-7 explosion-proof and NEMA-4 waterproof, sand-cast, copper-free aluminum enclosures with corrosion resistance "safety-blue" polyester powder-coating for use in hazardous locations. FM, UL, cUL Certification: Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III, Type 4X. Demko/ATEX Certification: Ex II 2 G D EEx d IIC

Option EPW3 is a single-height enclosure for one TX83A loop-powered indicator. Option EPW2 is a double-height enclosure for a TX83A loop-powered indicator on top and a TX1500 Series isolated two-wire 4-20 mA transmitter on the bottom for indicating transmitter applications. Available with two female 1/2 NPT pipe fittings, all required internal mounting hardware, and mounting flanges for a wall or bulkhead.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models. For complete product specifications see the Related Links section at the bottom of this page.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
TX83A Star
300,00
Stock: 1 semaine
 
Flat surface or relay track mounting
TX84-2 Star
318,00
Stock: 1 semaine
 
EMT conduit mounting
TX84 Star
318,00
Stock: 1 semaine
 
NPT pipe mounting
Accesories
MXS1 Star
10,75
Stock: 1 semaine
 
Spring retainers for TX83A in explosion proof housing EPW3
MXS2 Star
10,75
Stock: 1 semaine
 
Spring retainers for TX83A in explosion proof housing EPW2
EPW3-ATEX Star
145,00
Stock: 1 semaine
 
NEMA 4 and NEMA 7 rated environmental enclosure with window, single height; includes MXS1 hardware (supplied with Demko/ATEX certificate)
EPW2-ATEX Star
161,00
Stock: 1 semaine
 
NEMA 4 and NEMA 7 rated environmental enclosure with window, double height for TX83A and TX1500 series transmitter; includes MXS1 and MXS2 hardware (supplied with Demko/ATEX certificate)
Tous les Montants indiqués Dans EUR, GBP, USD.
Noter: Comes with complete operator's manual.
Exemple de commande: (1) TX83A  current loop indicator with flat surface or relay track mounting, €300,00  plus (1) TX83A  current loop indicator with flat surface or relay track mounting, €300,00  plus (1) TX84 current loop indicator with NPT pipe mounting, €318,00  plus (1) TX84 current loop indicator with NPT pipe mounting, €318,00, €300,00 + 300,00 + 318,00 + 318,00 = €1 236,00

 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:


(1) Models Select:
TX83A pour CMV - Meter to Case pour 700 Vp
TX84-2 pour EMT conduit mounting
TX84 pour NPT pipe mounting

(2) Mounting Options Select:
Rien (champ vide de congé) pour Standard Unit
-MAT1 pour Adaptor plate for surface mount or 69.9 mm relay track-Available for TX83A only
-MDT1 pour Rail clamp for DIN relay track-Available for TX83A only

(3) Calibration and Certification Select:
Rien (champ vide de congé) pour Standard Unit with mounting options
-FS pour Custom configuration and calibration
Noter: Quelques combinaisons pourraient ne pas Être valides, please verify with la notice technique de coulée pour les Codes d'articles valides.