Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Coriolis Mass Flow Meter

FMC-5000

Coriolis Flow Meters | Mass Flow Meters | OMEGA | FMC-5000

Coriolis Flow Meters | Mass Flow Meters | OMEGA

PASSEZ VOTRE COMMANDE
2 ans de garantie CE
  • Mass Flow Rate, Volume, Density and Temperature Measurements
  • Rugged Meters with No Moving Parts Results in Minimal Maintenance
  • Accuracy Over a Wide Flow Range From a Single Meter Optimizes Plant Efficiency
  • No Flow Conditioning or Straight Pipe Runs Required, Making Installation Simplified and Less Expensive
Débitmètres de masse électronique - Voir Les Produits Associés

Déscription

The FMC-5000 Coriolis Mass Flow Meter is designed according to the Coriolis Force Principle. It is widely used for flow measurements and custody transfer in many industries such as petroleum, petrochemical, chemical, pharmaceutical, pulp and paper, food and dairy, and more. As an advanced flow and density measurement instrument, it is widely used in the measurement of liquids, gases and slurries, and garners a high reputation among customers around the globe. Coriolis meters are typically used in applications like batch control, blending, filling, dosing, custody transfer, process gas measurements, and more.

The FMC-5000 Series Coriolis Meter is designed according to the principle of Coriolis force. Under the alternating current effect, the electromagnetic coils mounted on the measuring tube will make two parallel measuring tubes vibrating at a certain fixed frequency. Whenever mass (either liquid or gas) flows through the measuring tubes, Coriolis force is generated, causing a “bending” or “deflection” in the top of the tubes. This deflection is sensed as a phase shift between two electronic pick-ups mounted on the tubes. The degree of phase shift is directly proportional to the mass flow within the tubes. The mass flow rate can be calculated by detecting the phase shift of the tubes. The temperature is also measured and used for compensation.



Specifications
Flow Range: See charts below
Connection: ANSI, DIN, JIS, or Sanitary Tri-Clamp flanges
Maximum Pressure: 16 bar (230 psi), [Optional: 25 bar (360 psi), 40 bar (580 psi) and 63 bar (913.7 psi)]
Body Material: 304 Stainless Steel
Measuring Tube Material: 316 L SS
Process Temperature Range:
    Integrate Type: -50 to 125°C (-58 to 257°F)
    Remote Type (-R): -50 to 200°C (-58 to 392°F)
Ambient Temperature: -40 to 55°C (-40 to 131°F)
Working Humidity: (5 to 95%) RH at 25°C (77°F)
Flow Accuracy/Repeatability:
    FMC-5100: 0.1/0.05% (Liquid Only)
    FMC-5200: 0.2/0.1% (Liquid Only)
    FMC-5500: 0.5/0.25%
Density Measuring:
    Range: 0.2 to 3.0 g/cm3
    Error: ± 0.002 g/cm3
    Repeatability: 0.001 g/cm3
Temperature Accuracy: ±1.0°C
Protection: NEMA 4X (IP65)
Approvals: CE, RoHS
Communications: RS485 (RTU Modbus®), HART® (-HART option)
Pulse Output: 0 to 10 kHz, ± 0.075% Full Scale
Current Output: 4 to 20 mA, 0.005% Full Scale
Power Supply: 18 to 36 Vdc, 85 to 265 Vac (-AC option), 15 W
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
Compact Liquid Coriolis Meters with 0.5% Accuracy
FMC-5501LA
€5,142.48
Stock: 4 semaines
 
Mounting ½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5502LA
€6,026.90
Stock: 1 semaine
 
Mounting 1" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5503LA
€6,778.38
Stock: 4 semaines
 
Mounting 1½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5504LA
€9,028.00
Stock: 14 semaines
 
Mounting 2" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5505LA
€11,851.00
Stock: 15 semaines
 
Mounting 3" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5506LA
€19,017.00
Stock: 15 semaines
 
Mounting 4" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5507LA
€24,338.00
Stock: 15 semaines
 
Mounting 6" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
Compact Liquid Coriolis Meters with 0.2% Accuracy
FMC-5201LA
€6,161.97
Stock: 9 semaines
 
Mounting ½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5202LA
€7,309.00
Stock: 9 semaines
 
Mounting 1" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5203LA
€8,168.00
Stock: 9 semaines
 
Mounting 1½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5204LA
€10,921.00
Stock: 9 semaines
 
Mounting 2" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5205LA
€14,557.00
Stock: 15 semaines
 
Mounting 3" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5206LA
€22,607.00
Stock: 15 semaines
 
Mounting 4" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5207LA
€29,473.00
Stock: 15 semaines
 
Mounting 6" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
Compact Liquid Coriolis Meters with 0.1% Accuracy
FMC-5101LA
€7,886.85
Stock: 13 semaines
 
Mounting ½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5102LA
€8,598.00
Stock: 9 semaines
 
Mounting 1" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5103LA
€9,795.00
Stock: 9 semaines
 
Mounting 1½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5104LA
€12,547.00
Stock: 9 semaines
 
Mounting 2" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5105LA
€15,555.00
Stock: 15 semaines
 
Mounting 3" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5106LA
€27,150.00
Stock: 15 semaines
 
Mounting 4" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5107LA
€35,013.00
Stock: 15 semaines
 
Mounting 6" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
Air/Gas
FMC-5501GA
€5,333.00
Stock: 9 semaines
 
Mounting ½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5502GA
€6,251.00
Stock: 9 semaines
 
Mounting 1" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5503GA
€7,029.00
Stock: 9 semaines
 
Mounting 1½" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5504GA
€9,028.00
Stock: 9 semaines
 
Mounting 2" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5505GA
€11,851.00
Stock: 15 semaines
 
Mounting 3" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5506GA
€19,017.00
Stock: 15 semaines
 
Mounting 4" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
FMC-5507GA
€24,338.00
Stock: 15 semaines
 
Mounting 6" ANSI, Pressure Rating 16 bar (230 psi), Power 18 to 36 Vdc, Communication RS485 (RTU Modbus)
† Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator’s manual.
NOTE: HEAVY WEIGHT - NO UPS - MOTOR FREIGHT ONLY!!! OVERWEIGHT SHIPPING CHARGES WILL APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.
 For meters with other than ANSI flanges, change the “A” at the end of the model number to “D” for DIN flanges, “J” for JIS flanges or “S” for Sanitary Tri-Clamp flanges (liquid only),
no additional charge.
To replace the RS485 communications with HART communications add “-HART” to the model number,
for an additional charge.
For units with remote mounted display/transmitter add “-R” to the model number, for an additional charge.

 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:


(1) Accuracy Select:
1 pour 0.1%
2 pour 0.2%
5 pour 0.5%

(2) Size Mounting Select:
1 pour 1/2" (15 mm)
2 pour 1" (25 mm)
3 pour 1 1/2" (40 mm)
4 pour 2" (50 mm)
5 pour 3" (80 mm)
6 pour 4" (100 mm)
7 pour 6" (150 mm)

(3) Media Type Select:
G pour Gas (0.5% Accuracy Only)
L pour Liquid

(4) Flange Type Select:
A pour ANSI
D pour DIN
J pour JIS
S pour Sanitary (Liquid Only)

(5) Remote Display Option Select:
Rien (champ vide de congé) pour None
-R pour Remote Mounted Display/Transmitter

(6) HART Communications Option Select:
Rien (champ vide de congé) pour RS485 Communications
-HART pour HART Communications
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Manuels de Produit:

Télécharger Quick - Start Mass Flowmeter Manual
Télécharger Coriolis Mass Flowmeters
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >