24 Digital I/O PCMCIA Card
Discontinued Product

IOP-241

24 Digital I/O PCMCIA Card Discontinued Product

PASSEZ VOTRE COMMANDE

PCMCIA PC Card Standard Specification 2.1 Compliant
Client Software Driver (PCMCIA Card Services Specification 2.1 Compatible)
“Hot-Swapping” Supported (Insertion and Removal of IOP-241 While System is Powered Up)
24 Buffered I/O Signals, Each May Be Configured As Input or Output
Eight Digital Signals Available as Interrupt Sources (Level Sensitive or Edge Triggered)
Selectable Base Address and Selectable and Sharable Interrupt

Déscription

The IOP-241 is no longer available. Please see the OMG-USB-DIO as a possible alternative or contact our Data Acquisition Department.

The IOP-241 is a PCMCIA card which allows parallel communication between personal computers with PCMCIA sockets and external devices. The IOP-241 is PCMCIA PC Card Standard Specification 2.1 compliant and plugs into Type II (5 mm) PCMCIA sockets. The IOP-241 provides up to 24 digital input and output signals. Each signal may be individually configured as input or output. In addition, each of the 24 signals are buffered to enhance the IOP-241’s drive capability. Eight of the digital signals may be used as interrupt sources. Each interrupt source may be programmed to be level sensitive or pulse triggered. An additional interrupt is available when all 24 I/O lines are needed. The interrupt signal of the IOP-241 may be mapped to any one of IRQ3-7, 9-12 or 14 and 15. The IOP-241 occupies 16 I/O address locations, and the address location may be selected by the user. All necessary software is included to install and configure the IOP-241 for use with DOS/Windows 3.x, and Windows 95/98. The IOP-241 is also shipped with DAQDRIVE, a software driver that allows programmers to create their own applications from most common DOS and Windows programming languages. For turn-key operation, the IOP-241 is also compatible with Labtech Notebook and Snap Master Software.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

IOP-241

Consultez le Service de ventes

Stock:

24 Channel digital I/O PCMCIA card

UIO-37

Consultez le Service de ventes

Stock:

Terminal strip, Requires CP-IO37 cable

† Tous les Montants indiqués Dans EUR
Notez: Comes with complete operator’s manual, DAQDRIVE and PCMCIA configuration software on CD ROM.

Manuels de Produit:

Télécharger Daqdrive software manual

Télécharger Daqdrive Supplemental manual

Télécharger IOP-241 operator's manual

Produits Liés:

SWD-LTN
Achetez maintenant →
Labtech Notebook PC-Based Data Acquisition Software for Windows
Discontinued Product