Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Conductivity Liquid Level Switch Electronics
Intrinsically Safe Relay Versions Available

LVC700 Series

Conductivity Liquid Level Switch Electronics Intrinsically Safe Relay Versions Available | LVC700 Series

PASSEZ VOTRE COMMANDE
  • Compatible with LVC-E series conductivity electrodes
  • LVC710 features a 1 amp relay
  • LVC750 features a .3 amp solid state relay

Déscription

The LVC700 Series conductivity switch electronics are intended for use with OMEGA LVC-E Series electrodes and LVC-S, LVC-N, and LVC-F Series mounting assemblies. They are available in three basic series. The LVC750 series models feature a 0.3 amp solid-state switched output with the following hazardous area classifications: FM-approved intrinsically safe for Class I, Division 1, Groups A, B, C, D and Class II, Division 1, Groups E, F, and G. The LVC750 series relays can also be used with other non-powered, strictly mechanical relay closures to provide intrinsic safety in hazardous areas. The LVC710 features a 1 amp electromechanical switched output for non-hazardous locations, bracket mounted with the bracket maintained at ground potential. The protective cover (supplied) must be in place over the screw terminal connections after wiring has been completed. The LVC710 and LVC750 are sealed in a blue polysulfone case.

Please download PDF file below for full product specifications
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
LVC752
Consultez le Service de ventes  
Stock: 
 
 
Normally Closed Pump-Up
† Tous les Montants indiqués Dans EUR
Notez: Note: Always treat hazardous areas with respect. Intrinsically safe relays must be installed by experienced personnel familiar with intrinsic safety wiring, and installation must be in accordance with the National Electrical Code (NEC). The relay must be mounted in a non-hazardous location, intrinsically safe wiring must be separated from non-intrinsically safe wiring, and the capacitance and inductance limitations of your copper wire run must not exceed the specifications listed in the current installation manual. Consult your local electrical code inspector for further details.
Comes with complete operator's manual. *Non-latching. Pump-up/pump-down units can be used for high or low latching alarm when used with an external reset switch.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >