Industrial HF-Resistant Alpha pH Electrode - Discontinued

PHE-901-HF - DISCONTINUED

PASSEZ VOTRE COMMANDE

In-line or Submersion Mount

HF Resistant

10 Feet of Cable

Table de commande

Déscription

Specs

Produits
de Liés

Imprimable

Top

Déscription
The PHE-901-HF model has been discontinued. Please see the -HF option in the PHE-7300 Series as a possible alternative or contact our Flow Engineering Department.

This rugged pH electrode is specially designed for pH determination in samples containing hydrofluoric acid or other acid fluorides. Such samples can cause rapid deterioration of a typical glass pH electrode. This electrode consists of a PVC housing, incorporating a non-glass reference element and a plastic membrane pH sensor. Corrosive acid fluoride solutions will not reduce electrode performance or lifetime. The electrode has a zero potential at 7 pH and can be effectively used on most pH analyzers and controllers. Manual temperature compensation is recommended where required. The electrode is threaded with a 1" MNPT on both ends. The electrode can be installed into a pipe tee for in-line use, or on the end of a 1" FNPT submersion pipe.

Specifications
pH Range: 1 to 8
Temperature: 0 to 50°C
Zero Potential: 7 pH
Maximum Pressure: 50 psi
Body Construction: PVC

Dimensions
Overall Length: 160 mm (6.3")
Fitting Length: 137.2 mm (5.4")
Diameter: 33.04 mm (1.30")
Cable Length: 3 m (10')

† Tous les Montants indiqués Dans EUR
Notez: PHCN-37 controllers are not compatible with this electrode

Produits Liés:

PHA-4, PHA-7 and PHA-10
Achetez maintenant →
Pre-mixed pH Calibration Solutions