Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Solid State Relays, High Reliability
Discontinued Product

SSR

Solid State Relays, High Reliability 
Discontinued Product | SSR

  • Current Ratings to 90 Amps
  • Multi-Million Cycle Life
  • Compatible with Temperature Controllers
  • Solid-State, SCR Design
  • Zero Voltage Switching
  • UL and CSA Certified
  • Control ac Lines to 440 Vac
  • ac and dc Control Signal Models
  • 200% Testing at Rated Current

Déscription

The SSR solid state relays are no longer available. Please see the SSRL series as a posssible alternative or contact our sales department for a substitute.

Control resistance heaters up to 10 kW using solid state relays in conjunction with lower rated temperature controllers. Solid state relays are SPST, normally open, switching devices with no moving parts, capable of millions of cycles of operation. By applying a control signal, an SSR switches "ON" the ac load current, just as the moving contacts do on a mechanical contactor. Three-phase loads can be controlled using 2 or 3 SSR’s. Use 3 SSR’s for “Y” or “star” 3-phase loads using a neutral line. Two SSR’s will control “delta” loads with no neutral line. Three solid state relays are also used when there is no neutral load to provide redundancy and extra assurance of control. “Switching” takes place at the zero voltage crossover point of the alternating current cycle. Because of this, no appreciable electrical noise is generated, making SSR’s ideal for environments where there are apparatuses susceptible to RFI.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
FHS-1
37,03
Stock: 1 semaine
 
Finned heat sink with 2°C/W nominal rating
FHS-2
40,49
Stock: 1 semaine
 
Finned heat sink with 1.2°C/W nominal rating
FHS-6
50,18
Stock: 1 semaine
 
Finned heat sink with 0.7°C/W nominal rating
SSRR20-12
Consultez le Service de ventes  
Stock: 
 
 
Shunt resistor with 2000 ohms, 12 watts value
SSRR20-50
15.24
Stock: 1 semaine
 
Shunt resistor with 2000 ohms, 150 watts value
SSRR15-12
Consultez le Service de ventes  
Stock: 
 
 
Shunt resistor with 1500 ohms, 12 watts value
SSRR15-50
13.88
Stock: 1 semaine
 
Shunt resistor with 1500 ohms, 50 watts value
KAX-10
91.28
Stock: 1 semaine
 
Fuses with 10 A capacity
KAX-25
79.35
Stock: 1 semaine
 
Fuses with 25 A capacity
KAX-30
123.58
Stock: 1 semaine
 
Fuses with 30 A capacity
KAX-45
Consultez le Service de ventes  
Stock: 
 
 
Fuses with 45 A capacity
KAX-70
316.98
Stock: 1 semaine
 
Fuses with 70 A capacity
KAX-90
Consultez le Service de ventes  
Stock: 
 
 
Fuses with 90 A capacity
KBH-50
196.60
Stock: 1 semaine
 
Fuses with 50 A capacity
KBH-70
181.06
Stock: 19 semaines
 
Fuses with 70 A capacity
KBH-90B
Consultez le Service de ventes  
Stock: 
 
 
Fuses with 90 A capacity
FB-1
Consultez le Service de ventes  
Stock: 
 
 
Fuse blocks for KAX-10, KAX-25
FB-2
Consultez le Service de ventes  
Stock: 
 
 
Fuse blocks for KAX-10, KAX-25
FB-3
Consultez le Service de ventes  
Stock: 
 
 
Fuse blocks for KAX-10, KAX-25
BS-101
449.94
Stock: 7 semaines
 
Fuse blocks for KAX-45, KAX-75, KAX-90, KBH (all models)
OT-201-1/2
Consultez le Service de ventes  
Stock: 
 
 
Thermally conductive compound for use between heat sink and SSR - 14 g (1/2 oz) size
OT-201-16
234.77
Stock: 4 semaines
 
Thermally conductive compound for use between heat sink and SSR - 4547 g (1 lb) size
Tous les Montants indiqués Dans EUR
Exemple de commande:  (1) FHS-2 finned heat sink, €40.49  plus (1) KAX-25 25 Amp fuse, €79.35  , €40.49 + 79.35 = €119.84
We noticed you are from the US. Visit your local site for regional offers and live support.