Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Stripp Heaters 2 Terminals Centered

ST Series

Stripp Heaters 2 Terminals Centered | ST Series

Stripp Heaters 2 Terminals Centered

130,47 ST-1003/120V

CE
  • 1 1 /2 " (3.8 cm) Wide
  • Rugged, Reliable, Premium Quality
  • 350 to 1000 Watt
  • U.L. Component Recognized and C.S.A. Certified

Déscription

OMEGALUX™ “ST” series strip heaters are used in applications for convection air heating and clamp on installations. Typical applications would involve clamping them to metal surfaces such as platens, outer surfaces of large vats tanks and heating ducts. Two important factors must be considered when selecting a strip heater:

1. The proper sheath material for resisting any rusting and oxidizing inherent in the process or environment and for withstanding the sheath temperature required.

Standard sheath materials are rust resisting iron, chrome steel and Incoloy (NS Series only). Stainless steel and Monel sheaths are available at an additional charge.

2. The watt density of the element, or watts per square inch of heated area. This should be low for heating asphalt, molasses and other thick substances with low heat transferability; it can be higher for heating air, metals and other heat-conducting materials. (See appropriate curves for determining allowable watt densities.)

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.



Dimensions-Inches (cm) Watts W/In2 Model No. Wt.
Lb (kg)
A B D
10 1/2 (27)9 1/2 (24)9 (23)35015ST-1003/*.75 (.34)
12 (30)11 (28)10 1/2 (27)50017ST-1205/*.88 (.39)
15 1/4 (39)14 1/4 (36)13 3/4 (35)50012ST-1505/*1.13 (.51)
17 7/8 (45)16 7/8 (43)16 3/4 (43)75015ST-1807/*1.38 (.63)
23 3/4 (60)22 3/4 (58)22 1/4 (57)100014ST-2401/*1.81 (.82)
/* Designate voltage, i.e.; insert 120V for 120 Vac or 240V for Vac.
Additional strip heater models available in other widths and configurations. Contact OMEGALUX.
† To determine maximum allowable wall density, see Figures C-8 or C-9.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
ST-1003/120V
130,47
Stock: 7 semaines
 
Strip heater, 350 W, 120 V, two centered terminals
ST-1003/240V
Consultez le Service de ventes  
Stock: 
 
 
Strip heater, 350 W, 240 V, two centered terminals
ST-1205/240V
133.36
Stock: 7 semaines
 
Strip heater, 500 W, 240 V, two centered terminals
ST-1205/120V
133.36
Stock: 7 semaines
 
Strip heater, 500 W, 120 V, two centered terminals
ST-1505/120V
141.09
Stock: 7 semaines
 
Strip heater, 500 W, 120 V, two centered terminals
ST-1505/240V
141.09
Stock: 7 semaines
 
Strip heater, 500 W, 240 V, two centered terminals
ST-1807/120V
153.65
Stock: 7 semaines
 
Strip heater, 750 W, 120 V, two centered terminals
ST-1807/240V
Consultez le Service de ventes  
Stock: 
 
 
Strip heater, 750 W, 240 V, two centered terminals
ST-2401/120V
168.15
Stock: 7 semaines
 
Strip heater, 1000 W, 120 V, two centered terminals
ST-2401/240V
Consultez le Service de ventes  
Stock: 
 
 
Strip heater, 1000 W, 240 V, two centered terminals
Tous les Montants indiqués Dans EUR
Exemple de commande: (1) ST-1807/120V 120 Vac, strip heater with two centered terminals, €153.65
We noticed you are from the US. Visit your local site for regional offers and live support.