Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

PT100 RTD Sensor with M12 Connector

PR-21 Series

PT100 RTD Sensor with M12 Connector | PR-21 Series

PT100 RTD Sensor with M12 Connector

PASSEZ VOTRE COMMANDE
  • Integral 4-Pin M12 A-Coded Male Connector for Easy Installation. An M12 Extension Cable is Required for Installation.
  • Available With a Variety 316L SST Threaded and Non-Threaded Housings
  • Pt100 or Pt1000 Class A, 4-Wire Platinum RTD Elements per IEC60751 Standard
  • Available with 1/4", 1/8", 6mm and 3mm Probe Diameters and a Wide Variety of Standard Lengths
  • Two Wiring Arraingements Available to Match Any 2, 3 or 4-Wire Requirement.
  • Temperature Range -50 to 250°C (-58 to 482°F) Sensing End, 85°C Max at Connector
  • Fast Response Time (3.5 Seconds or Less 63% Response in Water)

Déscription

See our New Vibration Tested Bendable RTD Sensors at PR-26

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

The PR-21 RTD sensors are made with 316L Stainless Steel housings for strength and corrosion resistance. These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables, as well as three "NPT" pipe thread and two metric mounting thread options for easy installation into an existing threaded port. A non-threaded housing option is also available for other types of installations.

For use in thermowells, the PR-21SL version of this sensor is the preferred solution. The PR-21SL design includes a non-threaded PR-21A style probe with a self-gripping spring and 1/2NPT threaded fitting to insure that the probe will contact the bottom of the thermowell bore without damaging the sensor. This insures that the sensor length will always be a perfect fit for your thermowell. See the PR-21SL for additional information.

The mounting thread options on the PR-21 Series sensors allow them to be used in a wide variety of applications, including:
  • Stand alone immersion sensors.

  • Installed directly into your product or process using an existing NPT or metric threaded port.

  • Other applications using a variety of available compression fittings or other accessories.


    • These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-21 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available when combined with a 4-pin female M12 connector extension or patch cable.

     
  • Standard Mounting Threads: 1/2NPT, 3/8NPT, 1/4NPT, M10x1mm, M8x1mm and Non-Threaded

  • Standard Probe Diameters: 1/4", 1/8", 6mm and 3mm

  • Standard Probe Lengths: 6" for 1/4" & 1/8" Diameters, 160, 260 & 360mm for 6mm and 3mm Diameters

  • Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available

  • Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request

  • Temperature Range: -50 to 250°C Except for the Connector Which is 85°C Max

  • Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient

  • Response Time: 3 Seconds Max (63.2% Response) When Immersed in Water Flowing at 3 feet/sec


    •
    Placez votre commande(Veuillez spécifier la référence du produit)
    Code d'article/ Desc.
    Qté
    Déscription
    Fractional Sized RTD Probes and Mounting Threads
    PR-21A-3-100-A-1/4-0600-M12-1
    €115.80
    Stock: 1 semaine
     
    Pt100, Class A, 1/4" Diameter by 6" Long RTD Probe with No Mounting Thread
    PR-21B-3-100-A-1/4-0600-M12-1
    €133.97
    Stock: 1 semaine
     
    Pt100, Class A, 1/4" Diameter by 6" Long RTD Probe with 1/2NPT Mounting Thread
    PR-21C-3-100-A-1/4-0600-M12-1
    €141.34
    Stock: 7 semaines
     
    Pt100, Class A, 1/4" Diameter by 6" Long RTD Probe with 3/8NPT Mounting Thread
    PR-21D-3-100-A-1/4-0600-M12-1
    €133.97
    Stock: 1 semaine
     
    Pt100, Class A, 1/4" Diameter by 6" Long RTD Probe with 1/4NPT Mounting Thread
    Metric Sized RTD probes and Mounting Threads
    PR-21A-3-100-A-M6-0160-M12-1
    €115.80
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 160mm Long RTD Probe with No Mounting Thread
    PR-21A-3-100-A-M6-0260-M12-1
    €124.06
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 260mm Long RTD Probe with No Mounting Thread
    PR-21A-3-100-A-M6-0360-M12-1
    €128.15
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 360mm Long RTD Probe with No Mounting Thread
    PR-21E-3-100-A-M6-0160-M12-1
    €133.97
    Stock: 1 semaine
     
    Pt100, Class A, 6mm Diameter by 160mm Long RTD Probe with M8 x 1 Mounting Thread
    PR-21E-3-100-A-M6-0260-M12-1
    €139.50
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 260mm Long RTD Probe with M8 x 1 Mounting Thread
    PR-21E-3-100-A-M6-0360-M12-1
    €146.00
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 360mm Long RTD Probe with M8 x 1 Mounting Thread
    PR-21F-3-100-A-M6-0160-M12-1
    €133.97
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 160mm Long RTD Probe with M10 x 1 Mounting Thread
    PR-21F-3-100-A-M6-0260-M12-1
    €139.50
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 260mm Long RTD Probe with M10 x 1 Mounting Thread
    PR-21F-3-100-A-M6-0360-M12-1
    €146.00
    Stock: 7 semaines
     
    Pt100, Class A, 6mm Diameter by 360mm Long RTD Probe with M10 x 1 Mounting Thread
    Optional Equipment
    TX-M12-RTD-C
    Consultez le Service de ventes  
    Stock: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA Output) with M12 Connections (Wiring Option 2 Probes)
    TX-M12-RTD-C-1
    Consultez le Service de ventes  
    Stock: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA Output) with M12 Connections (Wiring Option 1 Probes)
    TX-M12-RTD-V
    Consultez le Service de ventes  
    Stock: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10VDC Output) with M12 Connections (Wiring Option 2 Probes)
    TX-M12-RTD-V-1
    Consultez le Service de ventes  
    Stock: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10VDC Output) with M12 Connections (Wiring Option 1 Probes)
    TX94A-1-SS-M12F-1
    Consultez le Service de ventes  
    Stock: 
     
     
    4-20mA Transmitter in SST Housing, Range -40 to 49°C (-40 to 120°F) for use with -1 style RTD wiring
    TX94A-2-SS-M12F-1
    Consultez le Service de ventes  
    Stock: 
     
     
    4-20mA Transmitter in SST Housing, Range -18 to 93°C (0 to 200°F) for use with -1 style RTD wiring
    TX94A-3-SS-M12F-1
    Consultez le Service de ventes  
    Stock: 
     
     
    4-20mA Transmitter in SST Housing, Range -18 to 149°C (0 to 300°F) for use with -1 style RTD wiring
    TX94A-4-SS-M12F-1
    €277.29
    Stock: 15 semaines
     
    4-20mA Transmitter in SST Housing, Range -18 to 260°C (0 to 500°F) for use with -1 style RTD wiring
    M12C-PUR-4-S-F-2
    €19.99
    Stock: 1 semaine
     
    Extension Cable, 4-Wire Polyurethane Insulated, 2 meters (6.5') Long With Flying Leads One End
    M12C-PUR-4-S-F-5
    €24.47
    Stock: 4 semaines
     
    Extension Cable, 4-Wire Polyurethane Insulated, 5 meters (16.4') Long With Flying Leads One End
    M12C-PVC-4-S-F-5
    €23.54
    Stock: 3 semaines
     
    Extension Cable, 4-Wire PVC Insulated, 5 meters (16.4') Long With Flying Leads One End
    SSLK-14-14
    €22.89
    Stock: En stock
     
    Stainless Steel Compression Fitting with 1/4NPT thread
    † Tous les Montants indiqués Dans EUR
    Notez:
  • For 1000 ohm elements, change "100" in model number to "1000" at no additional charge.

  • For lengths longer than 6" or 360mm, change length of probe in model number to length required (examples: for 9.5" enter 0950, for 175mm enter "0175") and add $1 per inch or 25mm to the price.

  • For 3mm diameter probe, change "M6" to "M3" in the model number, for 1/8" diameter change "1/4" to "1/8" in the model number at no additional charge.

  • For use in thermowells, please see the PR-21SL page for the spring loaded version of this product.


    •  Exemple de commande: (1) PR-21A-3-100-A-1/4-0600-M12-1 100 Ohm, Class A RTD with 1/4" diameter by 6" long probe, no mounting thread and M12 connector, €115.80  plus (1) PR-21F-3-100-A-M6-0160-M12-1 100 Ohm, Class A RTD with 6mm diameter by 160mm long probe, M10x1 mounting thread and M12 connector, €133.97, €115.80 + 133.97 = €249.77

     Constructeur de référence

    Construisez votre numéro de pièce ci-dessous
    Descriptions des options de:


    (1) Mounting Thread Select:
    A pour Non Threaded Housing
    B pour 1/2NPT
    C pour 3/8NPT
    D pour 1/4NPT
    E pour M8x1
    F pour M10x1

    (2) Element Specification Select:
    100-A pour Pt100 Class A
    1000-A pour Pt1000 Class A

    (3) Probe Diameter Select:
    1/4 pour 1/4 inch Probe Diameter (Fractional)
    1/8 pour 1/8 inch Probe Diameter (Fractional)
    M6 pour 6mm Probe Diameter (Metric)
    M3 pour 3mm Probe Diameter (Metric)

    (4) Probe Length Select:
    0600 pour 6 inch Probe Length (Fractional Standard)
    0160 pour 160mm Probe Length (Metric Standard)
    0260 pour 260mm Probe Length (Metric Standard)
    0360 pour 360mm Probe Length (Metric Standard)

    (5) Wiring Arrangement as Shown Select:
    1 pour Option 1 Per Diagram
    2 pour Option 2 Per Diagram
    Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.
    We noticed you are from the US. Visit your local site for regional offers and live support.
    Stay here.
    Go to the the US site >