Thermocouple/RTD Probe Calibration Kit

TPCK Series

Thermocouple/RTD Probe Calibration Kit, TPCK-1D

PASSEZ VOTRE COMMANDE

System Accuracy Better than 1°C
Includes ice point TM and hot point™ References, DMM, Voltage Standard, Reference Thermometer, and Accessories
Thermocouple Probe Calibrations up to 900°F
Reference Probes Included for J, K, T, E Thermocouples

Déscription

TPCK Series offers a complete calibration system for any thermocouple element up to 482°C (900°F). The TPCK kit comes complete with everything needed to calibrate your probes. Included with each kit is a NIST traceable RTD probe, high precision digital RTD thermometer with 0.001°C resolution, 6-digit precision multimeter, hot point™ dry block calibrator, TRCIII ice point™ reference chamber, thermocouple reference probe assemblies, thermocouple millivolt vs. temperature reference tables, thermocouple lead wire and copper jumper jack. Used in calibration or metrology laboratories, the TPCK series is ideally suited to provide a practical solution for your calibration needs.
The hot point™ calibrator allows calibration of thermocouple and RTD probes quickly and easily. An integral RTD sensor assures high measurement accuracy and repeatability. Used in conjunction with the built-in PID controller, exceptional stability of ±0.3°F or better is attained at temperatures up to 482°C (900°F). The stabilizing block features two 1/4 in. diameter wells and one each of 3/16 , 1/8 and 1/16" diameter 6" deep wells. By placing the standard probe (supplied with the TPCK kit) in the well next to the probe under calibration, a temperature comparison is made.

The TRCIII ice point TM calibrator reference point cell relies on an equilibrium of ice and distilled, deionized water at atmospheric pressure to maintain six reference wells at precisely 0°C. The wells extend into a sealed cylindrical chamber containing the distilled, deionized water whose walls are cooled by thermo-electric elements. The reference wells are maintained at 0°C to within ±0.1°C or better and a stability of ±0.04°C for constant ambient. Supplied with the TPCK Series is a set which locates the thermocouple-copper transition reference junction at the end of an 1/8" diameter sheath for easy insertion into the TRCIII ice point® calibration chamber.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
For complete product specifications see the Related Links section at the bottom of this page.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

TPCK-1D

Consultez le Service de ventes

Stock:

Calibration Kit with RS-232 Interface

TRP-S

€659.39

Stock: 1 semaine

Type S thermocouple reference probe

TRP-R

€719.33

Stock: 1 semaine

Type R thermocouple reference probe

† Tous les Montants indiqués Dans EUR

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1)

TRP-

RAZ

Descriptions des options de:

(1) Thermocouple Type Select:
R pour Type R
S pour Type S
B pour Type B
G pour Type G
C pour Type C
D pour Type D
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Produits Liés:

General Thermocouple Specifications
Achetez maintenant →
Color Codes for Thermocouples, Wire and Connectors, tolerances, special limits of error, reference guide