Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17

PROGRAMMABLE INTERFACE DISPLAY FOR RATE, TOTAL AND CONTROL COMMANDS

FMI-100 Series

PROGRAMMABLE INTERFACE DISPLAY FOR RATE, TOTAL AND CONTROL COMMANDS | FMI-100 Series

€556,87 FMI-102D

PASSEZ VOTRE COMMANDE
Garantie 1 an CE
  • Displays Instantaneous and Total Flow
  • Digital RS232 or RS485 Interface (Multi-Drop Up to 64 Devices)
  • Programmable, Optically- Isolated Pulse and Digital Outputs
  • For Use with FMA1700/1800 or FMA5400/5500 Series
  • 16 Point Programmable Controls, With Ramping Up/Down
  • Free Configuration and Monitoring Utility Software
Débitmètres de masse électronique - Voir Les Produits Associés

Déscription

Click on this link if you need more information about a Flow meter.

The FMI-100 Series is for flowmeters and controllers with analog 0 to 5, 5 to 10, 0 to 10 Vdc or 4 to 20 mA input output interface, where flow indications/control, totalizers or alarm functions are required. Also when re-transmission of the flow rate and/or totalizer functions via optically-isolated pulse output or serial communication is desired. Local or programmable set point control for flow controllers (no host PC presence required). The graphical LCD has large 13 mm (0.51") digits for flow rate and 5.5 mm (0.21") for total and can be set by user to simultaneously show different combination of the flow parameters: flow rate, totalizers, flow alarms, and diagnostic events. All configuration parameter settings are easily accessed via a simple user-interface menu driven by a 6 button key-pad which can be password-protected. For flowmeters and/or flow controllers, FMI-100 provides jumpers selectable for 0 to 5 Vdc or 4 to 20 mA analog set point control signals. The flow rate set point can be adjusted locally via key-pad, remotely via host PC using digital communication interface, or programmed in advance using built-in 16 steps batch table with ramping up/down support. The programmable flow pulse output operates independently from the totalizers and based on configuration settings can provide pulse frequency proportional to instantaneous fluid flow rate. The FMI-100 provides two independent programmable flow totalizers. Both totalizers are updated every 100 ms and can be set to activate different events. Main totalizer accumulated total is backed-up in EEPROM memory every second. And it provides the user with a flexible alarm/warning system that monitors the fluid flow for conditions that fall outside configurable limits as well as visual feedback for the user via the LCD or via an optically-isolated output. All process data and settings can be read and modified manually via local LCD key-pad or through the digital RS232 or RS485 communication interface. Proprietary ASCII software interface command set and free Communication Utility software are provided.

Specifications
ADC/DAC Resolution: 12-bit
Analog Inputs: 0 to 5 Vdc, 4 to 20 mA, 5 to 10 Vdc (jumper-selectable), 0 to 10 Vdc (contact Flow Engineers at Omega for details)
Analog Outputs: 0 to 5 Vdc, 4 to 20 mA (jumper-selectable)
LCD: 128 x 64 graphic LCD with instantaneous flow reading and total volume indication, adjustable LCD contrast and back light
Key-Pad: Local 6 tactical push buttons
Pulse Output: User-programmable, optically-isolated, with preset active low time interval (10 to 6550 mS).
Digital Output: Two programmable, optically-isolated, UCE @ 40 Vdc, ICE @ 150 mA (voltage isolation; 250 Vrms)
Digital Interface: RS232 or RS485 (multidrop capability up to 64 devices)
Protocol: Proprietary ASCII software interface command set
Speed: 1200/2400/4800/9600/19200/38400/57600/115200 baud (user selectable)
Configuration:
    Stop Bit: 1
    Data Bits: 8
    Parity: None
    Flow Control: None
Addressing: Maximum 255 addresses (for RS485 option only)
Type: RS232 or RS485 2-wire
Power Requirements: 12 to 26 Vdc (up to 60 mA maximum)
Interface Connectors: Process I/O signals and digital RS232/RS485 interface, miniature 9-pin female D-SUB connector; digital optically-isolated outputs; TERM BLOCK HEADER 4POS 3.5 mm male pins, shrouded
Environment: Installation Level II, Pollution Degree II, (per IEC 664)
Electromagnetic Compatibility: Compliant ref. 89/336/EEC as amended; emission standard; EN 55011:1991, Group 1, Class A immunity standard: EN 55082- 1:1992
Operating Temperature: -10 to 70°C (14 to 158°F)
Dimensions: 86.4 W x 76.2 H x 19.1 mm D (3.4 x 3.0 x 0.75")
Weight: Approximately 125 g (0.3 lb)
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
  
FMI-102
€472,46
Stock: 9 semaines
 
RS232 monitor/control interface, no display
  
FMI-105
€443,28
Stock: 9 semaines
 
RS485 monitor/control interface, no display
  
FMI-102-10V
€472,46
Stock: 9 semaines
 
RS232 monitor/control interface, no display for 0 to 10V input/output
  
FMI-105-10V
€472,46
Stock: 9 semaines
 
RS485 monitor/control interface, no display for 0 to 10V input/output
  
FMI-102D
€556,87
Stock: 1 semaine
 
Rate/total, display, RS232 monitor/control interface
  
FMI-105D
€556,87
Stock: 12 semaines
 
Rate/total, display, RS485 monitor/control interface
  
FMI-102D-10V
€593,56
Stock: 9 semaines
 
Rate/total, display, 0 to 10V input/output monitor/control interface
  
FMI-105D-10V
€593,56
Stock: 12 semaines
 
Rate/total, display, 0 to 10V input/output monitor/control interface
Meter Accessories
  
FMI-100-MKM-DD
€81.40
Stock: 12 semaines
 
Meter mounting kit with two 9-pin D connectors
  
FMI-100-MKM-RD
€34.09
Stock: 9 semaines
 
Meter mounting kit with RJ11 to 9-pin D connector
  
FMI-100-MKM-FD
€76.39
Stock: 1 semaine
 
Meter mounting kit with flat wire to 9-pin D connector
Controller Accessories
Cliquez pour agrandir / réduire une liste d'achat connexeFMI-100-MKC-2C
FMI-100-MKC-2C
€123.93
Stock: 12 semaines
 
Controller mounting kit, 12VDC North American style plug with connector
  
FMI-100-MKC-2N
€125.25
Stock: 9 semaines
 
Controller mounting kit, 12VDC North American style plug, no connector
  
FMI-100-MKC-4C
€125.57
Stock: 12 semaines
 
Controller mounting kit, 24VDC North American style plug with connector
  
FMI-100-MKC-4N
€125.25
Stock: 9 semaines
 
Controller mounting kit, 24VDC North American style plug, no connector
  
FMI-100-MKC-2C-AU
€164.22
Stock: 9 semaines
 
Controller mounting kit, 12VDC Australian style plug with connector
  
FMI-100-MKC-2N-AU
€156.49
Stock: 9 semaines
 
Controller mounting kit, 12VDC Australian style plug, no connector
  
FMI-100-MKC-4C-AU
€164.22
Stock: 9 semaines
 
Controller mounting kit, 24VDC Australian style plug with connector
  
FMI-100-MKC-4N-AU
€156.49
Stock: 9 semaines
 
Controller mounting kit, 24VDC Australian style plug, no connector
  
FMI-100-MKC-2C-EU
€131.56
Stock: 9 semaines
 
Controller mounting kit, 12VDC European style plug with connector
  
FMI-100-MKC-2N-EU
€131.69
Stock: 9 semaines
 
Controller mounting kit, 12VDC European style plug, no connector
  
FMI-100-MKC-4C-EU
€140.22
Stock: 9 semaines
 
Controller mounting kit, 24VDC European style plug with connector
  
FMI-100-MKC-4N-EU
€131.69
Stock: 9 semaines
 
Controller mounting kit, 24VDC European style plug, no connector
  
FMI-100-MKC-2C-UK
€154.10
Stock: 9 semaines
 
Controller mounting kit, 12VDC U.K. style plug with connector
  
FMI-100-MKC-2N-UK
€156.49
Stock: 9 semaines
 
Controller mounting kit, 12VDC U.K. style plug, no connector
  
FMI-100-MKC-4C-UK
€168.62
Stock: 12 semaines
 
Controller mounting kit, 24VDC U.K. style plug with connector
  
FMI-100-MKC-4N-UK
€179.72
Stock: 9 semaines
 
Controller mounting kit 24VDC U.K. style plug, no connector
† Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >