Batch Controller

DPF11,DPF12

Batch Controller

^€474,93 DPF11

PASSEZ VOTRE COMMANDE

5 Digit Scaling Factor
Display Rate, Batch Size and (Batch Total or Grand Total)
Second B Relay Programmable for Output at Prewarn or Selected Batch/Grand Total
NEMA-4X/IP65 Front Panel
4-30V Pulse Input - 10 kHz Max. on DPF11
30 mV Magnetic Pickup Inputs on DPF12
4-20 mA or 0-20 mA Analogue Output Output
RS422/RS232 Serial Communication Option
Security Lockout

Instruments et accessoires - Voir Les Produits Associés

Déscription

The DPF11 miniature batcher is ideal for all batching applications. The display will show Batch Amount, Rate and Batch/Grand Total at the push of a button. The Start and Stop buttons make batching simple.

The DPF11 is a 6-digit totaliser and 4 1/2 digit ratemeter with two relay outputs. One output is dedicated to the Batch Amount (Preset A), the other can be activated for Prewarn or Batch/Grand Total. The unit can count up to the preset (reset to 0) or down from the preset (set to preset). Start, Stop and Reset functions can be activated from the front panel or remote inputs.

An analogue output (assignable for Rate or Batch Amount) is optional

Up to 99 units can communicate to a host computer on a single loop with the RS232 or RS422 communications options .

Specifications
Accuracy: 0.01% FS (±1 display digit)
Display: 6-digit, 14 mm high LED (±1 display digit)
Input Power: 110 Vac ±15%, 220 Vac ±15%, 24 Vac ±15%
Current: 250 mA dc max or 6.5 VA AC
Output Power: (115/230 VAC powered units only) 12 Vdc @ 50 mA, unregulated -10 +50%
Temperature:
Operating: 0°C to 54°C
Storage: -40 to 93°C
Humidity: 0 to 90% RH, non-condensing
Memory: EEPROM stores data for 10 years if power is lost
Approvals: CE approved
Pulse Input: Low = 0-1 Vdc, High = 4 to 30 Vdc 10 kΩ impedance,up to 10 kHz; min 0.05 Hz for rate indication
Mag. Input: 30 mV input, (50V max) signals 10 KΩ imp. 5 kHz max
Output Relays: (2) Rated 5 Amps, 120/240 Vac or 28 Vdc (NC relay contacts and NPN transistor output available with solder jumpers)
Panel Cutout: 92 W x 45 H x 108 mm D
Shipping Weight: 900g

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

DPF11 Series for 4-30V Pulse Input (FLSC-AMP-A may be required)

DPF11-220VAC

€483.68

Stock: 7 semaines

Batch meter 4-30 V Pulse input. 230Vac power

DPF11

€474.93

Stock: 1 semaine

Batch meter 4-30 V Pulse input. 115Vac power

DPF11-24VAC

€501.62

Stock: 7 semaines

Batch meter 4-30 V Pulse input. 24Vac power

Optional Amplifier for DPF11

FLSC-AMP-A

Consultez le Service de ventes

Stock:

Low level amplifier for magnetic pick-up type sensors

DPF12 Series for 30mV Input from magnetic pick-up sensors

DPF12-220VAC

€566.26

Stock: 7 semaines

Batch meter. 30 mV input. 230Vac power

DPF12

€587.27

Stock: 7 semaines

Batch meter. 30 mV input. 115Vac power

Trier par Référence

Code d'article

Qté

Code d'article

Qté

† Tous les Montants indiqués Dans EUR
Notez: For RS-232 or RS-422 output, add suffix “-RS232” or “- RS422” to part number
For field-selectable 4-20 or 0-20 mA output, add suffix “-A” to part number. Use table below to order and our sales team will confirm additional pricing

Produits Liés:

FP-6500
Achetez maintenant →
Insertion Paddlewheel Flow Sensors

FP-6000
Achetez maintenant →
Discontinued

FP5100 and FP5300
Achetez maintenant →
Paddlewheel Flow Sensors

FTB2000 Series
Achetez maintenant →
Economical Flow Sensors - Discontinued

FTB-100
Achetez maintenant →
Turbine Flowmeter With NPT End Fittings