Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Low Pressure Drop Gas Mass Flow Controllers For Clean Gases

FMA-LP2600A

MASS FLOW CONTROLLER | GAS FLOW | FMA-LP2600A

MASS FLOW CONTROLLER | GAS FLOW

5 042,00 FMA-LP2612A

Garantie 1 an CE
  • 130+ Gas Calibrations Including Pure and Mixed Gases
  • Pressure, Temperature, and Mass Flow Simultaneously Displayed
  • Easy-to-Use Pushbutton Interface
  • NIST Traceability Standard
  • Full Scale Ranges from 0.5 SCCM to 500 SLM
  • Response Time of 50 to 100 ms Typical
  • Turndown Ratio of 200:1
  • Position Insensitive
  • ±0.8% Reading Accuracy
  • RS232 Standard
  • Custom Live Gas Blend Programming
  • Store Up to 20 User Defined Gas Blends
Débitmètres de masse électronique - Voir Les Produits Associés

Déscription

The FMA-LP2600A Series mass flow controllers use the principle of differential pressure within a laminar flow field to determine and control mass flow rate. A laminar flow element (LFE) inside the meter forces the gas into laminar (streamlined) flow. Inside this region, the Poiseuille equation dictates that the volumetric flow rate be linearly related to the pressure drop. A differential pressure sensor is used to measure the pressure drop along a fixed distance of the LFE. This, along with the viscosity of the gas, is used to accurately determine the volumetric flow rate. Separate absolute temperature and pressure sensors are incorporated and correct the volumetric flow rate to a set of standard conditions. This standardized flow rate is commonly called the mass flow rate and is reported in units such as standard cubic centimeters per minute (SCCM) or standard liters per minute (SLM).

The controller uses a true proportional valve coupled to the flow body to control flow using the integral PID loop controller. Standard units include a 0 to 5V output (4 to 20 mA optional) and RS232 communications. The gas-select feature and the setpoints can be adjusted from the front keypad or via RS232 communications. Volumetric flow, mass flow, absolute pressure, and temperature can all be viewed or recorded through the RS232 connection. It is also possible to multi-drop up to 26 units on the same serial connection to a distance of 46 m (150').

Specifications
Accuracy: ±(0.8% of reading + 0.2% FS)
Repeatability: ±0.2% FS
Turndown Ratio: 200:1
Control Response Time: 100 ms
Input Control Signal: 0 to 5 Vdc, RS232
Output Signal: 0 to 5 Vdc, RS232
Optional Input/Outputs: 4 to 20 mA, 0 to 10 Vdc
Operating Temperature: -10 to 50°C (14 to 122°F)
Zero Shift: 0.02%/ATM FS/°C
Span Shift: 0.02%/ATM FS/°C
Humidity Range: 0 to 100% RH, non-condensing
Excess Flow Rate: 2.4% FS
Wetted Materials: Standard: 303 and 302 SS, FKM, silicone RTV (rubber), glass-reinforced nylon, aluminum, brass, 410 SS, silicone, glass; >250 SLM: 416 SS and nickel replace brass
-LSS (Option):316LSS, 303SS, 430FRSS, Perfluoroelastomer standard, FKM, EPDM, Buna, Neoprene Maximum Pressure: 50 psig
To Use in Volumetric Mode: Near atmosphere, 15 psig recommended maximum. Volumetric flow meters and controllers not certified for accuracy at mass flow rates above the rated flow range of the meter. They are designed for near atmospheric pressure conditions only. The recommended maximum operating pressure is 15 psig
Supply Current: 0.250 A for 20 SLM and under; 0.75 A for 50 SLM and above (typical)
Supply Voltage: 15 to 30 Vdc for units 2 SLM and smaller; 24 to 30 Vdc for units 5 SLM and larger
Electrical Connections: 8-pin circular mini DIN
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
Mass Flow Controllers
FMA-LP2601A
2,974.00
Stock: 10 semaines
 
0.5 SCCM, 10 to 32 UNF Thread
FMA-LP2601A-I
3,047.00
Stock: 10 semaines
 
0.5 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2602A
2,974.00
Stock: 10 semaines
 
1 SCCM, 10 to 32 UNF Thread
FMA-LP2602A-I
3,127.00
Stock: 10 semaines
 
1 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2614A
2,714.00
Stock: 4 semaines
 
2 SCCM, 10 to 32 UNF Thread
FMA-LP2614A-I
2,794.00
Stock: 4 semaines
 
2 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2615A
2,616.65
Stock: 4 semaines
 
5 SCCM, 10 to 32 UNF Thread
FMA-LP2615A-I
2,794.00
Stock: 4 semaines
 
5 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2603A
2,101.00
Stock: 4 semaines
 
10 SCCM, 10 to 32 UNF Thread
FMA-LP2603A-I
2,664.00
Stock: 4 semaines
 
10 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2616A
2,634.00
Stock: 4 semaines
 
20 SCCM, 10 to 32 UNF Thread
FMA-LP2616A-I
2,722.00
Stock: 4 semaines
 
20 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2604A
2,634.36
Stock: 4 semaines
 
50 SCCM, 1/8 FNPT
FMA-LP2604A-I
2,624.30
Stock: 4 semaines
 
50 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2617A
2,300.00
Stock: 4 semaines
 
100 SCCM, 1/8 FNPT connection
FMA-LP2617A-I
2,379.00
Stock: 4 semaines
 
100 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2618A
2,300.00
Stock: 4 semaines
 
200 SCCM, 1/8 FNPT connection
FMA-LP2618A-I
2,379.00
Stock: 4 semaines
 
200 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2619A
2,300.00
Stock: 4 semaines
 
500 SCCM, 1/8 FNPT connection
FMA-LP2619A-I
2,379.00
Stock: 4 semaines
 
500 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2620A
2,300.00
Stock: 4 semaines
 
1 SLM, 1/8 FNPT
FMA-LP2620A-I
2,379.00
Stock: 4 semaines
 
1 SLM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2605A
2,300.00
Stock: 4 semaines
 
2 SLM, 1/8 FNPT
FMA-LP2605A-I
2,293.94
Stock: 4 semaines
 
2 SLM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2606A
2,829.00
Stock: 10 semaines
 
5 SLM, 1/4 FNPT
FMA-LP2606A-I
2,908.00
Stock: 10 semaines
 
5 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2606A-I2
2,977.00
Stock: 10 semaines
 
5 SLM, 1/4 FNPT, two 4 to 20 mA output
FMA-LP2607A
2,829.00
Stock: 10 semaines
 
10 SLM, 1/4 FNPT
FMA-LP2607A-I
2,908.00
Stock: 10 semaines
 
10 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2608A
3,100.00
Stock: 10 semaines
 
20 SLM, 1/4 FNPT
FMA-LP2608A-I
3,172.00
Stock: 10 semaines
 
20 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2609A
3,308.00
Stock: 10 semaines
 
50 SLM, 3/4 FNPT
FMA-LP2609A-I
3,211.00
Stock: 1 semaine
 
50 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2610A
3,574.00
Stock: 10 semaines
 
100 SLM, 3/4 FNPT
FMA-LP2610A-I
3,640.00
Stock: 10 semaines
 
100 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2611A
3,776.00
Stock: 10 semaines
 
250 SLM, 3/4 FNPT
FMA-LP2611A-I
3,844.00
Stock: 10 semaines
 
250 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2612A
5,042.00
Stock: 10 semaines
 
500 SLM, 3/4 FNPT
FMA-LP2612A-I
5,110.00
Stock: 10 semaines
 
500 SLM, 3/4 FNPT, one 4 to 20 mA output
Accessories
FMA1600-C1
€58.44
Stock: 3 semaines
 
Replacement 1.8M (6') 8 pin male Mini-DIN single ended, cable connector
FMA1600-C1-25 FT
€106.05
Stock: 3 semaines
 
7.62M (25') 8 pin male Mini-DIN single ended, cable connector
FMA1600-C2
€67.30
Stock: 3 semaines
 
1.8M (6') 8 pin male Mini-DIN double ended, cable connector
FMA1600-C2-25 FT
€125.77
Stock: 3 semaines
 
7.62M (25') 8 pin male Mini-DIN double ended, cable connector
FMA1600-C3
€67.30
Stock: En stock
 
1.8M (6') 8 pin male Mini-DIN to DB9 female adapter
FMA1600-CRA
€67.30
Stock: 3 semaines
 
1.8M (6') 8 pin male right angle Mini-DIN single ended cable connector
FMA1600-MDB
€328.05
Stock: 4 semaines
 
Multi Drop Box
FMA1600-PSU
€105.21
Stock: 3 semaines
 
24 Vdc universal power supply
FMA1600-E2
Consultez le Service de ventes  
Stock: 
 
 
220VAC to 24VDC Power Supply for 50 LPM or greater
Tube Fitting Adapters for Threaded to 10/32
FTNY-K210BN
€7.18
Stock: 5 semaines
 
Nylon Body, TUBE ID 1/16" TO MALE 10-32UNF
FTPP-K210NP
€7.18
Stock: 1 semaine
 
Polypropylene Body, TUBE ID 1/16" TO MALE 10-32UNF
FTNY-K230BN
€7.18
Stock: 5 semaines
 
Nylon Body, TUBE ID 1/8" TO MALE 10-32UNF
FTPP-K230NP
Consultez le Service de ventes  
Stock: 
 
 
Polypropylene Body, TUBE ID 1/8" TO MALE 10-32UNF
Tous les Montants indiqués Dans EUR
Notez: Comes complete with 24 Vdc universal power supply, 1.8 m (6') cable, 8-pin male Mini- DIN connector, operator's manual, and NIST certificate.

Standard units are calibrated to air @ 5 psig for 0 to 1 LPM, 15 psig for 2 to 10 LPM, 30 psig for 20 to 100 LPM, and 50 psig for 200 LPM and greater.

For custom calibrations, add "-(*)" to the model number, no additional cost. *Specify gas, and inlet/outlet or backpressure for custom calibrations.

Calibrations done at ambient (25°C/77°F) temperature only.

To replace the standard RS232 communications with RS485, add suffix "-RS485" to the model number, add $120 to the price.

Standard input is 0-5V, for optional 4-20 mA input add suffix "-IN" to the model number, no additional cost.

Optional secondary output are scaled the same as the primary output scale. For an alternate output scale add suffix "-T" to the model number for temperature or "-P" for pressure, no additional cost.

For units scaled in SCFH, add suffix "-SCFH" to model number, no additional cost. Please specify the desired range in SCFH.

For totalizer option, add suffix "-TOT" to the model number, add $120 to the price. Please specify resolution.

This is a 6-digit counter. Examples: For totalizing in liters with 1/100 liter resolution, the max count would be 9999.99. For totalizing in liters with 1 liter resolution, the max count would be 999999.

For a Remote Display, add suffix "-RD-*FT" to the model number, add $210 to the price. Replace the * in the suffix with the required length in whole feet, the maximum length is 3.6576 m (12'). Please note the optimum distance in feet is between 2.7 to 3 m (9 to 10').

Ethernet/IP, DeviceNet, Modbus and Profibus communications are also available for an additional charge.


 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:


(1) Max Flow Select:
01 pour 0.5 SCCM
02 pour 1 SCCM
14 pour 2 SCCM
15 pour 5 SCCM
03 pour 10 SCCM
16 pour 20 SCCM
04 pour 50 SCCM
17 pour 100 SCCM
18 pour 200 SCCM
19 pour 500 SCCM
20 pour 1 SLM
05 pour 2 SLM
06 pour 5 SLM
07 pour 10 SLM
08 pour 20 SLM
09 pour 50 SLM
10 pour 100 SLM
11 pour 250 SLM
12 pour 500 SLM

(2) Output Select:
Rien (champ vide de congé) pour None
-I pour 4 to 20 mA output
-I2 pour Two 4 to 20 mA outputs
-V2 pour Two 0 to 5V Outputs
-I2-T pour Two 4 to 20 mA outputs second output for temperature
-V2-T pour Two 0 to 5V outputs second output for temperature
-I2-P pour Two 4 to 20 mA outputs second output for pressure
-V2-P pour Two 0 to 5V outputs second output for pressure
-VOL pour Volumetric flow rate as standard output

(3) Portable Version Select:
Rien (champ vide de congé) pour Standard
-B pour Portable version of the meter (not available on models with 4 to 20 mA output)

(4) Input Select:
Rien (champ vide de congé) pour 0 to 5V
-IN pour 4 to 20 mA input

(5) RS485 Select:
Rien (champ vide de congé) pour RS232
-RS485 pour RS485

(6) SCFH Select:
Rien (champ vide de congé) pour Standard
-SCFH pour Units scaled in SCFH

(7) Totalizer Select:
Rien (champ vide de congé) pour Standard
-TOT pour Totalizer
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.
We noticed you are from the US. Visit your local site for regional offers and live support.