Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Insertion Electromagnetic Flow Meter

FMG980 Series

Electromagnetic Flow Meter | Insertion Type | FMG980 Series

Electromagnetic Flow Meter | Insertion Type

Garantie 1 an CE
  • No Moving Parts
  • Durable
  • Easy to Install
  • Easy to Maintain
Débitmètres magnétiques - Voir Les Produits Associés

Déscription

Electromagnetic insertion type flow meters are designed for use with conductive liquids in 25 to 305 mm (1 to 12") pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments. The FMG980 is highly suitable for difficult applications with changing viscosities and pulsating flows, such as air-driven diaphragm pumps. With no moving parts, these meters can be used in “dirty” applications where debris would foul a mechanical meter. Like all magmeters, when used in chemical injection applications, these meters should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fluids before the meter). Designed for modularity and versatility, the FMG980 Series has a current-sinking pulse output that can be combined with a transmitter or indicator. For analog output and display of rate and total, an FMG980 display can be used. Blind analog output is provided by the FMG-1000-MAW. FMG980 Series fixed depth insertion meters require special fittings for installation.

Specifications
Pipe Sizes: 25 to 305 mm (1 to 12")
Materials Mechanical: 316 SS/ Brass/PVC
Electrodes: Hastelloy®
Housing: Cast powder-coated aluminum
Electrode Cap: PVDF
O-Ring: EPDM (FKM optional)
Power Full Power: 12 to 25 Vdc, 250 mA
Low Power: 12 to 25 Vdc, 40 mA average with 250 mA peaks
Flow Rate: 0.28 to 20 ft/sec (0.08 to 6.09 m/sec)
Temperature Ambient: -17 to 72°C (0 to 160°F)
Fluid Temperature:
    Brass/SS: 0 to 93°C (32 to 200°F)
    PVC: 0 to 55°C (32 to 130°F) @ 0 psi
Pressure:
    Brass/SS: 13.8 bar (200 psi)
    PVC: 10 bar (150 psi) @ 75°F
Minimum Conductivity: 20 microSiemens/cm
Calibration Accuracy: ±1% of full scale
Output: Square wave pulse, opto isolated, 550 Hz @ 20 ft/sec
Empty Pipe Detection: Defaults to zero flow
Regulatory: CE mark (stainless steel, brass and standard power only)
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
Insertion Electromagnetic Flow meter for use with Wall Mount Bracket (Installation fittings sold separately)
FMG981-B
930.72
Stock: 5 semaines
 
Brasselectromagnetic flow meter, insertion type sensor, for 1 to 3" fittings
FMG981-P
837.73
Stock: 5 semaines
 
PVC electromagnetic flow meter, insertion type sensor, for 1 to 3" fittings
FMG981-S
€949.82
Stock: 5 semaines
 
316 SS electromagnetic flow meter, insertion type sensor, for 1 to 3" fittings
FMG982-B
1,004.58
Stock: 5 semaines
 
Brass electromagnetic flow meter, insertion type sensor, for 4 to 10" fittings
FMG982-P
862.34
Stock: 5 semaines
 
PVC electromagnetic flow meter, insertion type, for 4 to 10" fittings
FMG982-S
1,194.07
Stock: 5 semaines
 
316 SS electromagnetic flow meter, insertion type, for 4 to 10" fittings
FMG983-B
1,098.00
Stock: 1 semaine
 
Brass electromagnetic flow meter, insertion type, for 12" fittings
FMG983-P
951.35
Stock: 1 semaine
 
PVC electromagnetic flow meter, insertion type, for 12" fittings
FMG983-S
1,314.00
Stock: 5 semaines
 
316 SS electromagnetic flow meter, insertion type senso, for 12" fittings
Insertion Electronmagnetic Flowmeter with Mounted Rate and Total Display (Installation fittings sold separately)
FMG981M-B
Consultez le Service de ventes  
Stock: 
 
 
Brass electromagnetic flow meter, insertion type senso, for 1 to 3" fittings, and mounted Rate and Total display
FMG982M-P
Consultez le Service de ventes  
Stock: 
 
 
PVC electromagnetic flow meter, insertion type senso, for 4 to 10" fittings, with mounted Rate and Total Display
FMG982M-S
Consultez le Service de ventes  
Stock: 
 
 
316SS electromagnetic flow meter, insertion type sensor, for 4 to 10" fittings, with mounted Rate and Total Display
FMG983M-B
1,322.00
Stock: 1 semaine
 
Brass electromagnetic flow meter, insertion type sensor, for 12" fittings, with mounted Rate and Total Display
FMG983M-P
1,211.00
Stock: 1 semaine
 
PVC electromagnetic flow meter, insertion type sensor, for 12" fittings, with mounted Rate and Total Display
Accessories
FMG980-BCAP
€104.79
Stock: 5 semaines
 
Brass fitting cap
FMG980-PCAP
€55.28
Stock: 5 semaines
 
PVC fitting cap
FMG980-SCAP
€123.25
Stock: 5 semaines
 
316SS fitting Cap
Fittings (sold separately)
Brass Sweat Fittings
FP981-1BRS
€403.83
Stock: 5 semaines
 
1" Brass Sweat fitting
FP981-15BRS
€426.95
Stock: 1 semaine
 
1.5" Brass Sweat fitting
FP981-2BRS
€459.58
Stock: 1 semaine
 
2" Brass Sweat fitting
FP981-3BRS
Consultez le Service de ventes  
Stock: 
 
 
3" Brass Sweat fitting
FP981-4BRS
Consultez le Service de ventes  
Stock: 
 
 
4" Brass Sweat fitting
Brass NPT Fittings
FP981-1BRT
€382.08
Stock: 1 semaine
 
1" Brass NPT fitting
FP981-15BRT
Consultez le Service de ventes  
Stock: 
 
 
1.5" Brass NPT fitting
FP981-2BRT
Consultez le Service de ventes  
Stock: 
 
 
2" Brass NPT fitting
FP981-3BRT
Consultez le Service de ventes  
Stock: 
 
 
3" Brass NPT fitting
FP981-4BRT
Consultez le Service de ventes  
Stock: 
 
 
4" Brass NPT fitting
Brass Saddle Fittings
FP981-3BRSF
Consultez le Service de ventes  
Stock: 
 
 
3" Brass Saddle fitting
FP982-4BRSF
Consultez le Service de ventes  
Stock: 
 
 
4" Brass Saddle fitting
Brass Weld/Braze
FP981-3BRW
Consultez le Service de ventes  
Stock: 
 
 
3" Brass Weldolet fitting
FP982-4BRW
Consultez le Service de ventes  
Stock: 
 
 
4" Brass Weldolet fitting
FP982-6BRW
Consultez le Service de ventes  
Stock: 
 
 
6" Brass Weldolet fitting
FP982-8BRW
Consultez le Service de ventes  
Stock: 
 
 
8" Brass Weldolet fitting
FP982-10BRW
Consultez le Service de ventes  
Stock: 
 
 
10" Brass Weldolet fitting
FP983-12BRW
Consultez le Service de ventes  
Stock: 
 
 
12" Brass Weldolet fitting
Carbon Steel Tee Fittings
FP981-1C
Consultez le Service de ventes  
Stock: 
 
 
1" Carbon Steel NPT Tee fitting
FP981-15C
€395.70
Stock: 1 semaine
 
1.5" Carbon Steel NPT Tee fitting
FP981-2C
Consultez le Service de ventes  
Stock: 
 
 
2" Carbon Steel NPT Tee fitting
Carbon Steel Weld Fittings
FP981-3CW
Consultez le Service de ventes  
Stock: 
 
 
3" Carbon Steel Weldolet fitting
FP982-4CW
Consultez le Service de ventes  
Stock: 
 
 
4" Carbon Steel Weldolet fitting
FP982-6CW
Consultez le Service de ventes  
Stock: 
 
 
6" Carbon Steel Weldolet fitting
FP982-8CW
Consultez le Service de ventes  
Stock: 
 
 
8" Carbon Steel Weldolet fitting
FP982-10CW
Consultez le Service de ventes  
Stock: 
 
 
10" Carbon Steel Weldolet fitting
FP983-12CW
Consultez le Service de ventes  
Stock: 
 
 
12" Carbon Steel Weldolet fitting
Ductile Iron Saddle Fittings
FP981-3DS
Consultez le Service de ventes  
Stock: 
 
 
3" Ductile Iron Saddle fitting
FP982-4DS
Consultez le Service de ventes  
Stock: 
 
 
4" Ductile Iron Saddle fitting
FP982-6DS
Consultez le Service de ventes  
Stock: 
 
 
6" Ductile Iron Saddle fitting
FP982-8DS
Consultez le Service de ventes  
Stock: 
 
 
8" Ductile Iron Saddle fitting
FP982-10DS
Consultez le Service de ventes  
Stock: 
 
 
10" Ductile Iron Saddle fitting
FP983-12DS
Consultez le Service de ventes  
Stock: 
 
 
12" Ductile Iron Saddle fitting
PVC Saddle Fittings (PVC saddles supplied with BUNA O-rings only)
FP981-3PVCS
Consultez le Service de ventes  
Stock: 
 
 
3" PVC Saddle fitting
FP982-4PVCS
Consultez le Service de ventes  
Stock: 
 
 
4" PVC Saddle fitting
FP982-6PVCS
Consultez le Service de ventes  
Stock: 
 
 
6" PVC Saddle fitting
FP982-8PVCS
€322.25
Stock: 1 semaine
 
8" PVC Saddle fitting
PVC Tee Fittings
FP981-1PVC
Consultez le Service de ventes  
Stock: 
 
 
1" PVC Tee fitting
FP981-15PVC
Consultez le Service de ventes  
Stock: 
 
 
1.5" PVC Tee fitting
FP981-2PVC
€195.35
Stock: 5 semaines
 
2" PVC Tee fitting
304SS Tee Fittings
FP981-1S
Consultez le Service de ventes  
Stock: 
 
 
1" 304SS NPT Tee fitting
FP981-15S
€1,145.00
Stock: 1 semaine
 
1.5" 304SS NPT Tee fitting
FP981-2S
Consultez le Service de ventes  
Stock: 
 
 
2" 304SS NPT Tee fitting
316SS Weld/Braze Fittings
FP981-3SW
Consultez le Service de ventes  
Stock: 
 
 
3" 316SS Weldolet fitting
FP982-4SW
Consultez le Service de ventes  
Stock: 
 
 
4" 316SS Weldolet fitting
FP982-6SW
Consultez le Service de ventes  
Stock: 
 
 
6" 316SS Weldolet fitting
FP982-8SW
Consultez le Service de ventes  
Stock: 
 
 
8" 316SS Weldolet fitting
FP982-10SW
Consultez le Service de ventes  
Stock: 
 
 
10" 316SS Weldolet fitting
FP983-12SW
Consultez le Service de ventes  
Stock: 
 
 
12" 316SS Weldolet fitting
Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator’s manual.

Fittings are sold separately.


We noticed you are from the US. Visit your local site for regional offers and live support.