Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Panier  |  Contact  | 
NUMÉRO VERT0805 541 038
INTERNATIONAL+33 01 57 32 48 17

Votre source pour la mesure et le Contrôle de Procédés

Wedge Flow Meter | Differential Pressure Design - Discontinued

FW1000 Series

 | FW1000 Series

605,00 FW1105

Garantie 1 an CE
  • No Required Inlet or Outlet Straight Plumbing
  • ±2% Full Scale Accuracy
  • ±0.5% Full Scale Repeatability
  • Compact and Rugged
  • Linear Analog Output


The FW1000 Series has been discontinued. Please see the FMG90 Series as a possible alternative or contact our Flow Engineering Department.

The FW1000 series are minimally invasive, low-cost segmented wedge flow sensors. The segmented wedge element provides a simple and reliable restriction for sensing flow as related to pressure differential. The FW1000 design allows users to install the meter in any full pipe orientation (horizontal, vertical or inverted). It is compact and rugged measuring less than 254 mm (10") long and 89 mm (3½") wide, with a flanged mounting base for simple installation. This series is offered with several ranges of calibration to accommodate the requirements typical to process water applications. Three standard NPT port sizes are available to accommodate installations. The standard unit can also be converted to a 1 to 10 Vdc output in the field.

Accuracy: ±2% of full-scale
Repeatability: ±½% of full-scale
Maximum Operating Pressure: 8.6 bar (125 psig) Maximum Operating Temperature: 76°C (170°F)
Standard Test Media: Tap water @ 21°C (70°F)
Electronic Output: 0 to 5 Vdc (standard), 4 to 20 mA (optional)
Power Requirements: 12 to 35 Vdc
Flow Measuring Range: 0.5 to 15 GPM (1.9 to 57 LPM) full-scale
Turn Down Ratio: 10:1
Maximum Current Consumption: <50 m ADC
Minimum Load Resistance: 1000 Ω
Maximum Transmission Distance: <61m (<200')
Resolution: Infinite
Response Time:<500 mS to 90% (step change)
Protection: Short circuit, transient and reverse polarity
End Ports: PVC
Wedge Element: PVC
Pressure Sensor: Polyetherimide
Electrical Enclosure: Polycarbonate
Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator's manual.
Exemple de commande: (1) DPF64 Digital rate meter, €285,00  plus (1) FW1210 Wedge flow ½ NPT 1 to 10 GPM, €605,00  plus (1) TX4-100 Multi conductor wire, €32,00, €285,00 + 605,00 + 32,00 = €922,00

 Constructeur de référence

Construisez votre numéro de pièce ci-dessous
Descriptions des options de:

(1) Fittings Select:
1 pour 3/8 NPT
2 pour 1/2 NPT
3 pour 3/4 NPT

(2) Range Select:
05 pour 0.5 to 5 gpm
10 pour 1 to 10 gpm
15 pour 1 to 15 gpm

(3) Output Select:
Rien (champ vide de congé) pour 0 to 5 Vdc
-I pour 4 to 20 mA
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.