Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

General Purpose Electropneumatic Transducers - NOT CE Compliant - Not for sale in UK/EU

IP211 and EP211

General Purpose Electropneumatic Transducers | IP211 and EP211

General Purpose Electropneumatic Transducers

416,87 IP211-X15

  • Low Cost
  • Built-in Volume Booster
  • Small Size
  • Field Reversible
  • Low Air Consumption
  • Mounts at Any Angle
  • Convenient External Span and Zero Adjustment
    (Except for Explosion Proof Models)
  • NEMA 4 (IP65 Enclosure)
  • Wide Supply Pressure Range
  • Low Supply Pressure Sensitivity
Vannes, régulateurs et convertisseurs I/P - Voir Les Produits Associés

Déscription

The IP211/EP211 Series transducer is an electropneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The 211 Series accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM). Model selection includes General Purpose, FM Intrinsically Safe, and CSA Intrinsically Safe.

Mounting
These transducers can be pipe, panel, or bracket mounted in any position. Positions other than verticle will require recalibration of the zero adjustment. For maximum output stability the transducers should be mounted in a vibration free location or such that vibration is isolated in the X and Z axis.

Field Reversible
All transducers are calibrated at the factory for direct acting operation but may be used in the reverse acting mode by reversing the polarity of the signal leads and recalibrating. When recalibrated for reverse acting applications, the transducers provide a minimum of their full rated output pressure (i.e.15, 27, or 30 psig) upon input signal failure.

Please Review the pdf Spec Sheet for Complete Product Specifications!
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
General Purpose Current to Pressure (i/p)
FM Intrinsically Safe Current to Pressure (i/p)
CSA Intrinsically Safe Current to Pressure (i/p)
General Purpose Voltage to Pressure (e/p)
Accesories
Cliquez pour agrandir / réduire une liste d'achat connexeTX4-100
TX4-100
€49.97
Stock: En stock
 
4-Conductor Shielded Wire
  
OP-6
Consultez le Service de ventes  
Stock: 
 
 
Reference Book: Fundamentals of Temperature, Pressure & Air Flow Measurement
Tous les Montants indiqués Dans EUR
Notez: Comes with complete operator’s manual and mounting bracket.
Exemple de commande: (1) IP211-X60 2 to 60 psig, 0.1 to 4.1 bar, 4 to 20 mA input range, €492.04
We noticed you are from the US. Visit your local site for regional offers and live support.