Screw Plug Immersion Heaters for Process Water Applications

MTS-1 Series

Immersion Heaters for Process Water Applications

^€852,11 MTS-110-3/120V

PASSEZ VOTRE COMMANDE

1 ¼" NPT Stainless Steel Passivated Screw Plug
Stainless Steel Passivated Elements
High Watt Density (43 to 86 W/in2)
1 to 2 kW
Without Thermostat
120 and 240 Volt, Single Phase
General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure

Thermoplongeurs - Voir Les Produits Associés

Déscription

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Controller Section for our selection of process controllers

SPECIFICATIONS
Wattage: 1 to 2 kW
Power: 120 and 240 V, 1 phase
Watt Density: 43 to 86 W/in²
Screw Plug: 1¼ NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moistureresistant/ explosion-resistant enclosure².

kW	Volts	W/in²	No. Htg. Elem.	E1 General Purpose Enclosure¹			E2 Moisture Resis/Explosion Resis.²
kW	Volts	W/in²	No. Htg. Elem.	Dim. B cm (in)	Model No.	Wt.kg (lb)	Model No.	Wt.kg (lb)
1	120	43	2	15.5 (6 1/8)	MTS-110-3/*	0.9 (2)	MTS-110-3E2/*	2.3 (5)
1	240	43	2	15.5 (6 1/8)	MTS-110-3/*	0.9 (2)	MTS-110-3E2/*	2.3 (5)
1.2	120	53	2	15.5 (6 1/8)	MTS-112/*	0.9 (2)	MTS-112E2/*	2.3 (5)
1.2	240	53	2	15.5 (6 1/8)	MTS-112/*	0.9 (2)	MTS-112E2/*	2.3 (5)
1.5	120	65	2	15.5 (6 1/8)	MTS-115/*	0.9 (2)	MTS-115E2/*	2.3 (5)
1.5	240	65	2	15.5 (6 1/8)	MTS-115/*	0.9 (2)	MTS-115E2/*	2.3 (5)
2	120	86	2	15.5 (6 1/8)	MTS-120/*	0.9 (2)	MTS-120E2/*	2.3 (5)
2	240	86	2	15.5 (6 1/8)	MTS-120/*	0.9 (2)	MTS-120E2/*	2.3 (5)

* Designate voltage, i.e., "120" for 120 Vac or "240" for 240 Vac.
¹ Heaters with general purpose enclosures are UL Listed and CSA certified.
² Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

E1 General Purpose Enclosure1

Heaters with general purpose enclosures are UL Listed and CSA certified.

MTS-110-3E2/120

€1,267.00

Stock: 6 semaines

1 kW/120 VAC/43 W/in^2

MTS-110-3/120V

€852.11

Stock: 6 semaines

1 kW/120 VAC/43 W/in^2

MTS-110-3/240V

Consultez le Service de ventes

Stock:

1 kW/240 VAC/43 W/in^2

MTS-120/120

€911.39

Stock: 6 semaines

2 kW/120 VAC/86 W/in^2

MTS-120/240

€911.39

Stock: 6 semaines

2 kW/240 VAC/83 W/in^2

E2 Moisture Resis/Explosion Resis.2

Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

MTS-110-3E2/120

€1,267.00

Stock: 6 semaines

1 kW/120 VAC/43 W/in^2

MTS-110-3E2/240

Consultez le Service de ventes

Stock:

1 kW/240 VAC/43 W/in^2

Trier par Référence

Code d'article

Qté

Code d'article

Qté

† Tous les Montants indiqués Dans EUR
Exemple de commande: (1) MTS-120/240 2 kW heater powered by 240 Vac, €911.39