Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Explosion Resistant Drum Heaters

SEPDH Series

Explosion Resistant Drum Heaters | SEPDH Series

Explosion Resistant Drum Heaters

€2 652,00 SEPDH-C-1300-120-T3

PASSEZ VOTRE COMMANDE
  • Factory Mutual Hazardous Area Approval
  • Class I, Div 2, Groups A,B, C, and D; Class II, Div 2, Groups F and G
  • Inherently Safe
  • Integral Built-In High-Limit Thermal Cutout** Prevents Temperature Runaway
  • Up to 21/2 Watts Per Square Inch
  • Exposure Temperature Up to 200°C (392°F)
Éléments chauffants flexibles - Voir Les Produits Associés

Déscription

Click on this link if you need more information about Silicone heater elements or general information about industrial heater elements.

OMEGALUX™ silicone rubber area drum heaters are low-watt density electrical resistance heaters in blanket form. They are designed to provide a practical, efficient means of freeze protection, viscosity control, melting of solids, and maintaining materials at elevated temperatures in Class I, Division 2 areas.
OMEGALUX™ SEPDH drum heaters feature built-in high-limit thermal cutout protection, which, in the event of a primary temperature controller failure, maintains heater sheath temperature below the minimum safe auto-ignition temperature of the material being heated or materials in the area. OMEGALUX™ SEPDH drum heaters are compatible with most chemical fluids and oils used in field service. Unlike many other drum heaters, the SEPDH has a thin-line design that lets it fit between the drum and the cradle.

Insert Codes for model numbers
High-Limit Thermostat Temperature
T4A: 70°C (158°F)
T3 :145°C (292°F)
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
55 Gallon
SEPDH-C-1300-120-T3
€2,652.00
Stock: 10 semaines
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1300-120-T4A
€2,607.27
Stock: 10 semaines
 
DRUM HEATER
SEPDH-C-1300-240-T3
€2,607.27
Stock: 10 semaines
 
DRUM HEATER
SEPDH-C-1300-240-T4A
€2,704.00
Stock: 10 semaines
 
DRUM HEATER
30 Gallon
SEPDH-C-1000-120-T4A
€2,600.00
Stock: 1 semaine
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1000-120-T3
€2,600.00
Stock: 10 semaines
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1000-240-T3
€2,600.00
Stock: 10 semaines
 
DRUM HEATER
SEPDH-C-1000-240-T4A
€2,600.00
Stock: 10 semaines
 
DRUM HEATER
† Tous les Montants indiqués Dans EUR
Notez: * Insert “High-Limit Thermostat Temperature” rating from above table. The maximum allowable sheath temperature (“T” rating) must be specified if drum heater is to be used in a Division II area. “C” specifies heaters with adjustable temperature control assembly and temperature ranges from -4 to 163°C (25 to 325°F).
** Article 501 of the NEC requires that the maximum sheath temperature of the heater shall not exceed 80 percent of the auto-ignition temperature of the surrounding atmosphere when heater is continuously energized.
Auto-Ignition Temperature: The minimum temperature required to initiate or cause selfsustained combustion of a solid, liquid or gas independently of the heating or heated element (see NFPA 325M, Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids).
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >