Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Strain Gauge Adhesives and epoxy

TT300, SG496, SG401

Strain Gauge Adhesives and epoxy | TT300, SG496, SG401

Strain Gauge Adhesives and epoxy

245,00 TT300

  • Strain Gauge Adhesives
  • Two 1 oz Hardener Bottles (1/2 Filled)
  • Two Plastic Funnels (35 mm Dia.)
  • Two Brush Caps
  • One 2 oz Bottle of Acetone
  • One 2 oz Bottle of Acid Primer
  • One 2 oz Bottle of Neutralizer
  • One 2 oz Bottle of Resin Solvent
  • Operator’s Manual
Jauges de contrainte, accessoires et instrumentation - Voir Les Produits Associés

Déscription

OMEGA’s TT300 cement is a heat-cured, 2-part epoxy adhesive that can be used to bond polyimide-backed strain gauges for strain measurement up to 200°C (392°F). Each TT300 kit includes 2 bottles of resin and hardener that are pre-measured to ensure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for 1 minute.

A bottle each of hardener and resin produce approximately 3/4 oz of adhesive. The shelf life of the resin-hardener mixture is 6 weeks at room temperature. The shelf life of the unmixed components is indefinite, provided that the bottles are kept tightly sealed. Each TT300 kit includes 2 oz of acetone, acid primer, neutralizer, and rosin solvent for cleaning and preparing the surface, as well as 2 funnels and 2 cap brushes.

SG496 and SG401 are general purpose cold-curing, 1-part strain gauge glues. They are the most commonly used adhesives for strain gauges. They cure in 1 minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate, and SG496 is a methyl-based cyanoacrylate. They have a 1-year shelf life at room temperature, but shelf life may be longer at colder temperatures. The strain gauge gluetemperature range is -54 to 82°C (-65 to 180°F).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for products on this page. You will be contacted by Internet Sales to confirm after the order is placed.
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
Quick Ship
Cliquez pour agrandir / réduire une liste d'achat connexeTT300
TT300
245,00
Stock: 8 semaines
 
Complete strain gauge adhesive kit including heat cure TT300 Cement
Quick Ship
Cliquez pour agrandir / réduire une liste d'achat connexeSG496
SG496
32,50
Stock: 1 semaine
 
1 oz methyl-based cyanoacrylate for metals (approx. 750 gages)
Quick Ship
Cliquez pour agrandir / réduire une liste d'achat connexeSG401
SG401
10,25
Stock: 1 semaine
 
0.1 oz ethyl-based cyanoacrylate for porous materials (approx. 50 gages)
Tous les Montants indiqués Dans EUR
We noticed you are from the US. Visit your local site for regional offers and live support.