Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Current to Pressure (I/P) Converter -  NOT CE Compliant - Not for sale in UK/EU

IP210A

Current to Pressure (I/P) Converter - Order online | IP210A

Current to Pressure (I/P) Converter - Order online

2 ans de garantie
  • Loop Power
  • Ideal for Pneumatic Control Systems
  • IP65 Sealed Case
  • Zero and Span Adjustments for Field Calibration
  • Rugged Zinc Cast Housing
Vannes, régulateurs et convertisseurs I/P - Voir Les Produits Associés

Déscription

A "current to pressure" converter (I/P) converts an analog signal (4-20 mA) to a proportional linear pneumatic output (3-15 psig). Its purpose is to translate the analog output from a control system into a precise, repeatable pressure value to control pneumatic actuators/operators, pneumatic valves, dampers, vanes, etc. The IP210 is a loop powered instrument, which eliminates the need for an external power supply.

SPECIFICATIONS
Accuracy: IP210A 1.5 and 2.3% (see spec sheet)
Supply Sensitivity: +/-0.15% span per 1.5psig and +/-0.004% span per 1.0psig (see spec sheet).
Zero Adjustment: 5% FS
Span Adjustment: 20% FS
Operating Temp.: -29 to 60 °C (-20 to 140°F)
Input Resistance: <300 Ohms
Media: Oil free clean dry air filtered to 25 µm
Max. Supply Pressure: 100 psi and 150 psi (see spec sheet).
Min. Supply Pressure: 3 or 5 psi above maximum output pressure (see spec sheet).
Air Consumption (leakage): 0.1 SCFM or 0.07 SCFM (see spec sheet).
Flow Rate: 12 SCFM for 2-60 psi ; 24 SCFM > 60 psi
Response Time: Less than 0.5 seconds (10 to 90%step)
Failure Mode: Upon electrical failure, the signal pressure falls to bleed pressure.
Pressure Port: 1 /4 " NPTF
Electrical Conn.: DIN 43650 with screw terminals included
Housing: IP65 rated, Epoxy painted zinc die castings
Construction: Nitrile diaphragms, SS/nylon flapper, nozzle, and supply valve. Integral surface mounting bracket included.
Weight:3 lb (1.7 kg)
Tous les Montants indiqués Dans EUR
Notez: All other models are 2 wire loop powered models.
We noticed you are from the US. Visit your local site for regional offers and live support.