Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Fully Isolated Limited Distance Modem

LDM70 Series

Fully Isolated Limited Distance Modem | LDM70 Series

Fully Isolated Limited Distance Modem

Garantie 1 an
  • DC to 57,600 Baud
  • Complete Isolation with Optical Couplers and Power DC-to-DC Converter
  • Data Terminal Ready, Carrier Detect Handshake Without Extra Wires
  • Surge Protectors
  • Four LED Diagnostic Indicators
  • Operation to 3 Miles (5 KM) at 9600 Baud, 1 Mile (1.7 KM) at 19,200, 0.5 Miles (0.8 KM) at 57,600
  • Four-Wire Full Duplex, Two-Wire Simplex
  • Self-Powered or Host-Powered
  • Wide Operating Temperature Range: 0 to +70°C
Convertisseurs et produits de communication - Voir Les Produits Associés

Déscription

The LDM70 Series of products is designed to allow RS-232 devices to be connected over distances sufficient to cover any industrial or institutional complex of buildings.

The LDM70 Series is designed for full duplex, asynchronous operation over two DC-continuity, non-loaded, twisted-wire pairs. Through special high-speed optically coupled circuits, they may communicate at data rates up to 57,600 baud. A handshake operation is implemented over the same two-wire pairs. A self-powered model and a host-powered model are available. The self-powered unit uses 12 Vac from a wall-mounted transformer, while the host-powered unit takes ±DC power from pins 9 and 10 of the RS-232 connector. The modem circuits—and, consequently, the host device—are protected from electrical transients due to lightning strikes or operation of heavy industrial equipment.

Each device features a convenient Data-Communication Equipment (DCE) to Data-Terminal Equipment (DTE) switch which reverses pins 2 and 3 of the RS-232 connector. For installation and troubleshooting, each unit has diagnostic Light-Emitting Diodes (LEDs) on the transmit and receive lines. In addition, LEDs indicate valid carrier detect and data terminal ready. The RS-232 connection is through a 25-pin D sockect. Field connection is made through a modern, solderless, screw-termination assembly.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
LDM70-S
Consultez le Service de ventes  
Stock: 
 
 
Fully isolated limited distance modem with 25 pin female RS-232 connector, screw termination field connector, host-powered
LDM70-ST
Consultez le Service de ventes  
Stock: 
 
 
Fully isolated limited distance modem with 25 pin female RS-232 connector, screw termination field connector, transformer powered
Tous les Montants indiqués Dans EUR
Notez: Includes operator’s manual. Transformer powered units also include ac wall mount transformer.
We noticed you are from the US. Visit your local site for regional offers and live support.