Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Operator Interface

MMI-01

Operator Interface | MMI-01

Operator Interface

Garantie 1 an
  • Ideal Operator Interface for Si Programmable Drives
  • Connects Directly to Si-Programmable Drives Using the Standard Programming Cable – No Special Wiring Required
  • Power is Supplied by the Drive – No Additional Power Supply Required
  • Easy to Program Using Si™ Programmer Software
  • 4-Line, 20 Characters/Line LCD Display
  • 20-Key Keypad
  • Can be Surface Mounted or Flush Mounted [NEMA 4/12 (IP56/52) Rating for Flush Mounting Only]
  • Sample Motion Programs Available by Request
Variateurs et moteurs - Voir Les Produits Associés

Déscription

The MMI-01 is an easy-to-use, flexible device that allows an operator to enter move speeds, move distances or repeat loop counts. Messages can also be displayed and the program can be paused until the user presses a key, such as ENTER, YES or NO. Program branching can be accomplished based on the response of YES or NO. The MMI-01 is compact, easy to install and carries a NEMA 4/12 (IP56/52) rating (the 4 x 20 character display and 20-key membrane keypad are sealed). Connection to any of our "Si" or "i" indexer drives is accomplished by the standard programming cable that is supplied with every drive. This cable also supplies power to the MMI-01 so that no additional power supply or wiring is needed. Set-up and programming of the MMI-01 is fast and easy. Our programmable "Si" or "i" drives are furnished with Si™ Programmer software, which allows the user to easily program instructions for the terminal. Complex, confusing items like baud rate, parity and cursor positioning are handled automatically by the software. On-screen emulation of the MMI-01 by the Si™ Programmer software allows a potential user to try the MMI before purchasing one.
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
MMI-01
Consultez le Service de ventes  
Stock: 
 
 
Operator interface
Tous les Montants indiqués Dans EUR
We noticed you are from the US. Visit your local site for regional offers and live support.