Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17

Wireless Pt100 Probe/Transmitter Assembly for Use in Hygienic Applications

UWRTD-TW-NB9W Wireless Temperature Sensors/Transmitters

Pt100 Temperature probe with wireless transmitter | UWRTD-TW-NB9W Wireless Temperature Sensors/Transmitters

Pt100 Temperature probe with wireless transmitter

€661,17 UWRTD-NB9W-1PT304-14-4

PASSEZ VOTRE COMMANDE
Garantie 1 an CE
  • Stainless Steel Construction with White Polypropylene Transmitter Housing
  • Complete, Ready to Install and Operate Assembly is Available With Optional 3-A Approved Thermowells for CIP (Clean-in-Place) Hygienic Applications
  • Wireless Radio Transmitter and Antenna are Housed in the Probe Head
  • Free Software Converts Your PC Into a Multi-Channel Chart Recorder or Data Logger
  • Interface up to 48 Different Wireless Transmitters With One USB Receiver
  • Low Power Operation and Sleep Mode Allows for Long Battery Life
  • Each Wireless Probe Assembly Transmits Process Temperature, Ambient Temperature, Signal Strength and Battery Status in Real Time
  • Works with All OMEGA™ UWTC Series USB or Web Enabled Ethernet Receivers and Wi Series Meter/ Controller/Scanner and DIN Rail Receivers
Capteurs, émetteurs, récepteurs, compteurs et contrôleurs sans fil - Voir Les Produits Associés

Déscription

Click on this link if you need more information about Sanitary Sensors.

OMEGAs new Wireless RTD Probe Assemblies - UWRTD-NB9W Series for hygienic applications feature a complete, ready to install, pre-wired PT100 sensor and wireless transmitter package. Each battery powered wireless unit will transmit measurements back to a host receiver up to 120 m (400') away. Each unit comes factory assembled, tested, calibrated and preprogrammed for fast installation. When activated, the unit will transmit readings continuously at pre-set time intervals that were programmed by the user during initial setup and installation. Each unit measures and transmits: process temperature, ambient temperature wireless link signal strength and battery condition to a remote host and the data is displayed on the PC in real time using the free provided software.

SPECIFICATIONS
Available Types: 100 Ω (standard), 500 Ω, 1000 Ω (special order)
RTD Measurement Range:
    0.00385: -200 to 850°C (-328 to 1562°F)
    0.00392: -100 to 457°C (-148 to 854°F) (special order)
RTD Measurement Accuracy: ±0.5°C (1°F) of reading
RTD Measurement Resolution: 1°C/1°F
Operating Environment: -10 to 70°C (14 to 158°F)
RTD Probe/Sensor: Pt100, Class "A"
Computer Interface: USB (one programming cable included with all receivers)
Transmit Sample Rate: Programmable from 1 sample/minute to 1 sample/ every 5 seconds Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz, direct sequence spread spectrum, license free worldwide
RF Output Power: 10 dBm (10 mW)
Range of RF Link: Up to 120 m (400') outdoor line of sight; up to 40 m (130') indoor/urban
Software (Included Free): Requires Windows® 98, ME, 2000, XP or Vista (32 bit)
Internal Battery: One 3.6V lithium, 8.4 Ah capacity (C-cell) included
Battery Life (Typical): (3 years) 1 sample/minute reading rate @ 25°C (77°F)
Data Transmitted to Host: Process reading, ambient reading, transmit strength and battery condition
Probe Assembly Material: Stainless Steel
Transmitter Housing Material: White polypropylene head

Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe.
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
Accessories
USB Receivers with Software and Cable for Data Display, Graphing and Logging on a PC
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-REC1
UWTC-REC1
€543.44
Stock: 7 semaines
 
48-channel receiver/host (USB powered)
  
UWTC-REC2-V1
€682.82
Stock: 7 semaines
 
48-channel transceiver with 1 channel 0-5 Vdc output
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-REC2-D-V1
UWTC-REC2-D-V1
Consultez le Service de ventes  
Stock: 
 
 
48-channel transceiver with 1 channel 0-5 Vdc output and backlit local display
  
UWTC-REC2-V2
Consultez le Service de ventes  
Stock: 
 
 
48-channel transceiver with 1 channel 0-10 Vdc output
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-REC2-D-V2
UWTC-REC2-D-V2
€758.67
Stock: 7 semaines
 
48-channel transceiver with 1 channel 0-10 Vdc output and backlit local display
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-REC2-MA
UWTC-REC2-MA
€658.39
Stock: 4 semaines
 
48-channel transceiver with 1 channel 4-20 mA output
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-REC2-D-MA
UWTC-REC2-D-MA
€731.54
Stock: 7 semaines
 
48-channel transceiver with 1 channel 4-20 mA output and backlit local display
Receiver with Ethernet Port and Built-In Web Server. Works with up to 32 Transmitters for Viewing/Logging Data via an Ethernet Network or the Internet
Panel Mount Scanner and Controller with Built-In LED Display. Automatically Scans Up to 8 Transmitters. With PID Control Output and Ethernet. (See Related Links Below)
  
wi833-U
Consultez le Service de ventes  
Stock: 
 
 
with 2 relay control/alarm outputs
  
wi844-U
Consultez le Service de ventes  
Stock: 
 
 
with two pulsed 10 Vdc @ 20 mA control outputs
  
wi852-U
Consultez le Service de ventes  
Stock: 
 
 
with analogue output selectable as either control or retransmission of process value, and SSR
  
wi853-U
Consultez le Service de ventes  
Stock: 
 
 
with analogue output and single relay
DIN Rail Mount Scanner and Controller. Automatically Scans Up to 8 Transmitters. With PID Control Output and Ethernet. (See Related Links Below)
  
wiDR53-U
Consultez le Service de ventes  
Stock: 
 
 
with analogue output for control or retransmission and single relay
  
wiDR52-U
Consultez le Service de ventes  
Stock: 
 
 
with analogue output and single SSR
  
wiDR44-U
Consultez le Service de ventes  
Stock: 
 
 
with two pulsed 10 Vdc @ 20 mA outputs
  
wiDR33-U
Consultez le Service de ventes  
Stock: 
 
 
with dual relay outputs
Batteries
Cliquez pour agrandir / réduire une liste d'achat connexeUWTC-BATT-C
UWTC-BATT-C
€100.61
Stock: En stock
 
Replacement battery assembly for models UWRTD-NB9W
† Tous les Montants indiqués Dans EUR
Notez: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe.
 Exemple de commande: (1) UWRTD-NB9W-1PT304-14-6 Wireless Pt100 probe/transmitter. 1/4, €682.82 
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >